Talk to the Experts

Phone: 888-530-9009 | Email: sales@custom-cal.com

      Find Your Product
RSS    LinkedIn    RSS

AGILENT 8482A REPAIR and AGILENT 8482A CALIBRATION

 
Custom-Cal has a high success rate in the repair of the AGILENT 8482A. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the AGILENT 8482A Calibration. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another RF Power Sensor? Shop for Comparable Products on our  used RF Power Sensor page

 
   AGILENT 8482A   Description / Specification:    
AGILENT 8482A 4.2 GHz Thermocouple Power Sensor

The HP 8482A 50-ohm silicon monolithic thermocouple Power Sensor gives you extremely low SWR even at mm-wave frequencies. Low SWR translates into minimum mismatch uncertainty and optimum measurement accuracy. The Agilent 8482A power sensor is designed for use with the E4418A/B, E4419A/B, 435B, 436A, 437B, 438A, 70100A and E1416A power meters. Frequency range: 100 kHz to 4.2 GHz. Maximum SWR: 100 to 300 kHz; 1.60, 0.3 to 1 MHz; 1.20, 1MHz to 2GHz; 1.10, 2 to 4.2 GHz; 1.30. Power of range: 0.3 microW to 100 mW(-30 to +20 dBm). Maximum power: 300 mW average, 15 W peak, 30W - us per pulse. Power Linearity: +10 to +20 dBm + 2, - 4%. Connector type: Type-N(m).



 

   
Standard Calibration $125.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the AGILENT 8482A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Average Power
Average power means that the energy transfer rate is to be averaged over many periods of the lowest frequency involved. For a CW signal, the lowest frequency and highest frequency are the same, so average power and power are the same. For an amplitude modulated wave, the power must be averaged over many periods of the modulation component of the signal as well.

Harmonic
A harmonic of a wave is a component frequency of the signal that is an integer multiple of the fundamental frequency, i.e. if the fundamental frequency is f, the harmonics have frequencies 2f, 3f, 4f, . . . etc.

Phase Noise
Phase noise is the frequency domain representation of rapid, short-term, random fluctuations in the phase of a waveform, caused by time domain instabilities. Phase noise (L(f)) is typically expressed in units of dBc/Hz, representing the noise power relative to the carrier contained in a 1 Hz bandwidth centered at a certain offsets from the carrier.


Please contact us for your AGILENT 8482A REPAIR and/or AGILENT 8482A 4.2 GHz Thermocouple Power Sensor CALIBRATION

I'm interested in: 
 
Calibration Type (Select one):


 
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 
 (*) Required Fields    For formal quote please fill in all fields.
From (Email):*
Contact Name:*
Company:
Address 1:
Address 2:
City:
State/Territory/Province:
Zip/Postal Code:
Country:*
Phone:*

 
Comment:
 
 
Repair and Calibration of Fiber Optic Instruments - Optical Spectrum Analyzer OSA, Laser Source (DFB-LD-WDM-BBS), OTDR, Optical Power Meter, Tunable Laser Source (TLS), Wavelength Meter. Repair and Calibration of RF Instruments - Network Analyzer SNA VNA, Spectrum Analyzer, Signal Generator Signal Analyzer, Frequency Counter, Power Meter. Test Equipment Datasheet