YOKOGAWA DL7100-701410 CALIBRATION and YOKOGAWA DL7100-701410 REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the YOKOGAWA DL7100-701410 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Oscilloscope?
Shop for Comparable Products on our
 used Oscilloscope page

 
   YOKOGAWA DL7100-701410   Description / Specification:    
YOKOGAWA DL7100-701410 4 Ch 500 MHz SignalExplorer Digital Oscilloscope

The Yokogawa DL7100-701410 SignalExplorer was designed to satisfy the key feature requirements for waveform measuring systems. These features are: Simple and accurate capturing of complex signals. High-speed extraction and screen display of desired information from large volumes of captured data. Specifications. DC to 500 MHz Bandwidth. Input channels: 4 analog (CH1 through CH4) and 16-bit digital (optional). Input impedance: 1 M-ohm ±1.0%, approx. 20 pF, 50 ohm ±1.0% (V SWR 1.4 or less (DC to 500 MHz)). Voltage-axis sensitivity setting: 1 M-ohm input : 2 mV/div to 10 V/div (1 - 2 - 5 steps), 50 ohm input : 2 mV/div to 1 V/div (1 - 2 - 5 steps). Time axis range: 1 ns/div to 50 s/div (record length is 10 k Words or more), 1 ns/div to 5 s/div (record length is 1 k Words). Time base precision: ±(0.005%). Maximum sample rate Realtime sampling mode: With interleave ON : 1 GS/s, With interleave OFF : 500 MS/s. Maximum record length: With interleave ON : 2 MWords/CH, With interleave OFF: 1 MWords/CH. Display 8.4 - inch (approx. 21.3 cm) color TFT liquid crystal display.



 

Standard Calibration $285.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the YOKOGAWA DL7100-701410. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Clipping
Clipping is the limiting of a signal so that it never exceeds some threshold.

Line Regulation
Line regulation is the capability to maintain a constant output voltage level on the output channel of a power supply despite changes to the input voltage level.

Peak Envelope Power
Peak envelope power is the maximum value of the envelope power. Envelope power is measured by making the averaging time much less than 1/fm where fm is the maximum frequency component of the modulation waveform. The averaging time is therefore limited on both ends: (1) it must be small compared to the period of the highest modulation frequency, and (2) it must be large enough to be many RF cycles long.

RMS
RMS or root mean square is a statistical measure of the magnitude of a varying quantity


Please contact us for your YOKOGAWA DL7100-701410 CALIBRATION and/or YOKOGAWA DL7100-701410 4 Ch 500 MHz SignalExplorer Digital Oscilloscope REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: