Keysight (Agilent) 54852A CALIBRATION and Keysight (Agilent) 54852A REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 54852A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Oscilloscope?
Shop for Comparable Products on our
 used Oscilloscope page

 
   Keysight (Agilent) 54852A   Description / Specification:   Spec Sheet 
Keysight (Agilent) 54852A 4 Ch 2 GHz Infiniium Oscilloscope

The Agilent 54852A High-Performance 4 Channel Infiniium Oscilloscope with it's combination of 2 GHz and 10 GSa/s on all channels makes it ideal for designs incorporating PCI-Express, Serial ATA, Rapid IO, HyperTransport, InfiniBand,or Gigabit Ethernet. MegaZoom deep memory enables the capture of the data transmission across these buses with the resolution required to perform high resolution parametric measurements of the system’s operation. Standard memory is 256 K at all sampling speeds. Option 001 provides 1 M up to 10 GSa/s and 32 M at 2 GSa/s and slower sampling. Specifications. Bandwidth: 2 GHz. Channels: 4. Maximum Sampling: 10 GSa/s. Maximum Memory: 1 M/32 Mpts. Rise Time (10% to 90%): 210 ps. Sampling Modes: Real Time (R.T.), R.T. with averaging, & R.T. with peak detect. Max Input, 50 Ohms: 1 mV/div to 1 V/div. Resolution: 8 bits. Range: 1 mV/div to 1 V/div. TimeBase Range: 10 ps/div to 20 s/div. Resolution Accuracy: ±1 ppm pk. Jitter: 4.5 ps RMS. Triggering Modes: Edge, glitch, line, pattern, state, delay by time, delay by events. Display: 8.4 inch diagonal color TFT-LCD. Options. -001, 1 M/ch memory upgrade. -002, EZJIT jitter analysis software. -003, High-Speed Serial Data Analysis/Mask Testing with clock recovery and 8b/10b decoding. -004, EZJIT Plus jitter analysis software. -006, My Infiniium Integration Package. -017, 20 GB removable hard disk drive. -021, Low-Speed Serial Data Analysis.



 

Standard Calibration $350.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 54852A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Available Gain
Available Gain is the ratio, at a specific frequency, of power available from the output to the power in from the source.

Decibel (dB)
A unit of measurement of power which indicates relative power. A -10 dB means a reduction in power by 10 times, -20 dB means another 10 times or 100 times overall, -30 means another 10 times or 1000 times overall and so on.

Mismatch Uncertainty
Mismatch Uncertainty is caused by re-reflections between one device (the source) and the device that follows it (the load).

Pulse Power
Pulse Power, the energy transfer rate is averaged over the pulse width. Pulse width is considered to be the time between the 50 percent risetime/falltime amplitude points. Pulse power averages out any aberrations in the pulse envelope such as overshoot or ringing.


Please contact us for your Keysight (Agilent) 54852A CALIBRATION and/or Keysight (Agilent) 54852A 4 Ch 2 GHz Infiniium Oscilloscope REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: