FLUKE 1577 CALIBRATION and FLUKE 1577 REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the FLUKE 1577 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Multimeter DMM?
Shop for Comparable Products on our
 used Multimeter DMM page

 
   FLUKE 1577   Description / Specification:    
FLUKE 1577 Handheld Digital Insulation Multimeter

The Fluke 1577 is a handheld digital insulation multimeter with a range of functions icluding DC/AC voltage and current, resistance and continuity. DC voltage max reading: 1000 V with an accuracy of +/-(0.2%+2) and a max resolution of 0.001 V. AC voltage max reading: 1000 V with an accuracy of +/-(2%+3) and a maximum resolution of 0.1 mV. DC current maximum reading: 400 mA with an accuracy of +/-(1.0%+2) and a max resolution of 0.01 mA. AC current maximum reading: 400 mA with an accuracy of +/-(2.0%+2) with a max resolution of 0.01 mA. MAximum resistance reading: 50 mega-ohms, with an accuracy of +/-(1.2%+2) and max resolution of 0.1 ohms. INsulation test minimum test current: 1 mA. Test voltages: 500 V, 1000 V. Max resistance per test voltage: 600 mega-ohms (at 1000 V). Maximum resolution per test voltage: 0.01 mega-ohms (50 V), 0.01 mega-ohms (100 V), 0.1 mega-ohm (250 V), 0.1 mega-ohm (500 V), 0.1 mega-ohm (1000 V). Accuracy per test voltage: +/-(3%+5) at 50 V, +/-(3%+5) at 100 V, +/-(1.5%+5) at 250 V, +/-(2.0%+5) at 500 V, +/-(2.0%+5) at 1000 V. Meter use with new batteries: 1000 hours.



 

Standard Calibration $95.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the FLUKE 1577. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Average Power
Average power means that the energy transfer rate is to be averaged over many periods of the lowest frequency involved. For a CW signal, the lowest frequency and highest frequency are the same, so average power and power are the same. For an amplitude modulated wave, the power must be averaged over many periods of the modulation component of the signal as well.

Dynamic range
Dynamic range the ratio of a specified maximum level of a parameter, such as power, current, voltage or frequency, to the minimum detectable value of that parameter.

Modulation
Modulation is the process by which the characteristic of one wave (the carrier) is modified by another.

Repeatability
Repeatability is the variation in a number of repeated measured quantities when measurement conditions are changed and restored. The value corresponds to half the spread between the minimum and maximum value measured.


Please contact us for your FLUKE 1577 CALIBRATION and/or FLUKE 1577 Handheld Digital Insulation Multimeter REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: