FLUKE 8846A REPAIR and FLUKE 8846A CALIBRATION
 
Custom-Cal has a high success rate in the repair of the FLUKE 8846A. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the FLUKE 8846A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Multimeter DMM?
Shop for Comparable Products on our  used Multimeter DMM page

 
   FLUKE 8846A   Description / Specification:    
FLUKE 8846A 6 1/2 Benchtop Digital Multimeter

The FLuke 8846A is a benchtop digital multimeter with 6.5 digits of resolution and a range of functions including: AC/DC voltage and current, resistance, frequency period, capacitance and temperature. DC voltage ranges: 100 mV to 1000 V with a maximum resolution of 100 nV and an accuracy of 0.0024 + 0.0005 (% measurement + % range). AC voltage ranges: 100 mV to 1000 V with a max resolution of 100 nV and an accuracy of +/- 0.06 + 0.03 and a frequency range of 3 Hz to 300 kHz. Resistance includes 2 x 4 wire, with ranges from 10 ohms to 1 giga-ohms; a maximum resolution of 10 micro-ohms and an accuracy of 0.010 + 0.001. DC current ranges go from 10 micro-amps to 10 A with a max resolution of 10 pA and an accuracy of 0.050 + 0.005. AC current ranges from 100 mA to 10 A with a maximum resolution of 100 pA, an accuracy of 0.10 + 0.04 and a frequency range: 3 Hz to 10 kHz. Frequency/ period ranges: 3 Hz to 1MHz with a maximum resolution of 1 micro-Hz and an accuracy of 0.01%. Capacitance ranges: 1 nF to 0.1 F with a resolution of 1 pf and an accuracy of 1%. Temperature ranges: -200 to 600 degrees C with a resolution of 0.01 degree and an accuracy of 0.06 degrees. Math functions: Null, Min/Max/Average, Std Dev, dB/DBm: yes. The multimeter also incudes continuity and diode tests. Advanced functions include statistics/histogram, trendplot, and limit test. In addition, the 8846A also comes with RS 232, IEE-488.2, ethernet, and usb intefaces.



 

Standard Calibration $95.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the FLUKE 8846A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Carrier Wave (CW)
Carrier Wave or Continuous Wave is a sinusoidal signal without modulation.

Harmonic
A harmonic of a wave is a component frequency of the signal that is an integer multiple of the fundamental frequency, i.e. if the fundamental frequency is f, the harmonics have frequencies 2f, 3f, 4f, . . . etc.

Noise Floor
Noise floor is the measure of the signal created from the sum of all the noise sources and unwanted signals within a measurement system.

Ripple
Ripple is the small unwanted residual periodic variation of the direct current (dc) output

Please contact us for your FLUKE 8846A REPAIR and/or FLUKE 8846A 6 1/2 Benchtop Digital Multimeter CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: