AEROFLEX-IFR FM/AM-1500 CALIBRATION and AEROFLEX-IFR FM/AM-1500 REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the AEROFLEX-IFR FM/AM-1500 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Communication Analyzer?
Shop for Comparable Products on our
 used Communication Analyzer page or new Communication Analyzer page

 
   AEROFLEX-IFR FM/AM-1500 (1500)   Description / Specification:    
AEROFLEX-IFR FM/AM-1500 Communications Service Monitor

The IFR FM/AM-1500 is a microprocessor controlled, digitally synthesized Communications Service Monitor. The receiver is a quadruple conversion superheterodyne receiver, capable of monitoring communication signals within a range of 300 kHz to 999.9999 MHz. The signal generator is capable of generating modulated or unmodulated carrier signals within a range of 100 kHz to 999.9999 MHz, at an output level which is continuously variable from 0 to -128 dBm. (The output level may be increased up to +20 dBm with the use of an optional High Output Amplifier.) Specification. RF Signal Generator Frequency Range: 100 kHz to 999.9999 MHz in 100 Hz increments. Frequency Accuracy: TXCO Master Oscillator, 5 * 10^-7 = 0.00005%. Residual FM: 50 Hz RMS (typically 30 Hz RMS)(Post detection 50-300 Hz). RF Output Power: 0 dBm to -128 dBm continuously adjustable into 50 Ohms (No range changing). RF Output Accuracy: ±2 dB (-10 to -80 dBm), ±2.5 dB (-80 to -128 dBm) . Duplex Generator Frequency Range: ±49.99 MHz from receive frequency (as indicated on front panel (LCD) in 10 kHz steps.). Duplex Generator Output Power: 0 dBm to -128 dBm continuously adjustable into 50 Ohms (No range changing).



 

Standard Calibration $590.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the AEROFLEX-IFR FM/AM-1500. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Extinction Ratio
Extinction ratio is the ratio of two optical power levels, of a digital signal generated by an optical source, where P1 is the optical power level generated when the light source is "on," and P0 is the power level generated when the light source is "off." The extinction ratio may be expressed as a fraction, in dB, or as a percentage. Extinction ratio = P1/P0

Receiver
A receiver is a detector and electronic circuitry to change optical signals into electrical signals.

Telecom Bands
Optical fiber communications typically operate in a wavelength region corresponding to one of the following Bands. O Band (original): 1260–1360 nm. E Band (extended): 1360–1460 nm. S Band (short wavelengths): 1460–1530 nm. C Band (conventional): 1530–1565 nm. L Band (long wavelengths): 1565–1625 nm. U Band (ultralong wavelengths): 1625–1675 nm


Please contact us for your AEROFLEX-IFR FM/AM-1500 CALIBRATION and/or AEROFLEX-IFR FM/AM-1500 Communications Service Monitor REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: