ILX LIGHTWAVE LDC-3722 CALIBRATION and ILX LIGHTWAVE LDC-3722 REPAIR

The ILX LIGHTWAVE LDC-3722 is currently in stock and available for purchase on our  Sales Page
It is also available for immediate rental.
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ILX LIGHTWAVE LDC-3722 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Laser Diode Controller?
Shop for Comparable Products on our
 used Laser Diode Controller page

 
   ILX LIGHTWAVE LDC-3722   Description / Specification:    
ILX LIGHTWAVE LDC-3722 Low Power Laser Diode Controller

ILX Lightwave LDC-3722 Low Power Laser Diode Controller is a combination of both laser diode current and temperature control in the same instrument. The current source provides a high stability output with a fully redundant current limit and multiple laser protection features. The built-in temperature controller can work with most thermistors and TE modules to deliver precision laser temperature control over a wide range of temperatures. Specifications. Range: 0-200 mA, 0-500 mA. Setpoint Resolution: 14 bit. Setpoint Accuracy: ±4 mA(200mA), ±10 mA (500mA). Compliance Voltage: 0 to 5 V adjustable. Temperature Coefficient: <100 ppm/°C. Short-Term Stability (10 min.): <10 ppm. Long-Term Stability (24-hour): <50 ppm. Noise and Ripple (rms) High Bandwidth Mode: <5 µA(200mA). Worst case transients: <5 mA. Photodiode Feedback; Range: 1 to 5000 mA. Output Stability: ±0.1%. Setpoint Accuracy: ±2 µA. Bias Voltage: 5 V reverse bias. Laser drive current display; Output current resolution: 0.01 mA. Output current accuracy @ 25°C: ±2% of full scale. Photodiode Current Range: 5 to 5000 µA. Photodiode Current resolution: 1 µA. Photodiode Current accuracy: ±2 µA. Optical power range: 0 to 200.00 mW. Optical power resolution: 10 µW. TEC Output; Output Type: Bipolar, constant current source. Compliance Voltage: 4 volts at 4 amps. Maximum Output Current: 4.0A. Maximum Output Power: 16 W. Current Noise and Ripple: <1 mA. Temperature Control; Temperature Control Range: -99°C to 150°C, -20°C to 70°C with typical 10 K thermistor.



 

Standard Calibration $240.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ILX LIGHTWAVE LDC-3722. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBm
Optical power referenced to 1 millimatt

Multimode Fiber
Multimode Fiber has a large core (almost always 62.5 microns - a micron is one one millionth of a meter - but sometimes 50 microns) and is used with LED sources at wavelengths of 850 and 1300 nm for short distance, lower speed networks like LANs. Both multimode and singlemode fiber have an outside diameter of 125 microns - about 5 thousandths of an inch - just slightly larger than a human hair.

Power Repeatability
Power Repeatability is the random uncertainty in reproducing the power level after changing and re-setting the power level. The power repeatability is ± half the span (in dB) between the highest and lowest actual power. Note: - The long-term power repeatability can be obtained by taken the power repeatability and power stability into account.

Refractive Index
The refractive index or index of refraction of a substance is a measure of the speed of light in that substance. It is expressed as a ratio of the speed of light in vacuum relative to that in the considered medium. The velocity at which light travels in vacuum is a physical constant, and the fastest speed at which energy or information can be transferred. However, light travels slower through any given material, or medium, that is not vacuum.

Total insertion loss
A measure of the loss of light within an optical component


Please contact us for your ILX LIGHTWAVE LDC-3722 CALIBRATION and/or ILX LIGHTWAVE LDC-3722 Low Power Laser Diode Controller REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: