SORENSEN DCR300-3B REPAIR and CALIBRATION

The SORENSEN DCR300-3B is currently in stock and available for purchase on our  Sales Page
It is also available for immediate rental.
Custom-Cal has a high success rate in the repair of the SORENSEN DCR300-3B. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another DC Power Supply?
Shop for Comparable Products on our
 used DC Power Supply page

 
   SORENSEN DCR300-3B   Description / Specification:    
SORENSEN DCR300-3B 300V 3A Single Output DC Power Supply

The Sorensen DCR300-3B high power programmable power supply has an input SCR controlled regulator which provides unparalleled reliability along with regulation and transient response performance suitable for nearly all burn-in and test applications. It has remote voltage and resistance programming in voltage and current modes. Adjustable current limiting (overload/short circuit protection) with automatic recovery and overvoltage protection with crowbar standard. Specifications. Output Power: 0 to 300 VDC, 3.0 A. Constant Voltage Ripple (PARD) (mV rms): 700. Constant Currennt Ripple (PARD) (mA rms): 7. Temp. Coeff Voltage: 45 mV/C, 0.9 mA/C. Programming Constants: 40 ohms/Volt, 133 ohms/Amp. Signal (Volt In/ Volt out): 1/30. Efficiency: 82 % (typ). Voltage Regulation: 0.03% with load change. Voltage resolution: 0.05% of Eo max. (typical). Transient Response: 50 ms (typical) to return to ± 1% band for step load change of 50 to 100% of full load. Current Regulation: 0.25% with 0 to 95% compliance-voltage change and ± 10% line voltage change combined. Current resolution: 0.05% of Io max. (typical). Current Drift (% Io max): 0.15% (typical).



 

Standard Calibration $135.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the SORENSEN DCR300-3B. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Average Power
Average power means that the energy transfer rate is to be averaged over many periods of the lowest frequency involved. For a CW signal, the lowest frequency and highest frequency are the same, so average power and power are the same. For an amplitude modulated wave, the power must be averaged over many periods of the modulation component of the signal as well.

Dynamic range
Dynamic range the ratio of a specified maximum level of a parameter, such as power, current, voltage or frequency, to the minimum detectable value of that parameter.

Modulation
Modulation is the process by which the characteristic of one wave (the carrier) is modified by another.

Repeatability
Repeatability is the variation in a number of repeated measured quantities when measurement conditions are changed and restored. The value corresponds to half the spread between the minimum and maximum value measured.


I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: