A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the FLUKE 87 IV Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Multimeter DMM?
Shop for Comparable Products on our
 used Multimeter DMM page

   FLUKE 87 IV (87IV)   Description / Specification:    
FLUKE 87 IV True RMS Handheld Digital Multimeter

The Fluke 87 IV True RMS Multimeter includes a bar graph that provides an analog indication of the measured input. Basic Specifications. DC Voltage: 0 to 1000 V. AC Voltage, true RMS: 15 mV to 1000 V – 100 kHz bandwidth. Basic Accuracy DC voltage: 0.025 %. Basic Accuracy AC voltage: 0.4 %. DC Current: 0 to 10 A (20 A for 30 seconds). AC Current, true RMS: 25 mA to 10 A (20 A for 30 seconds). Resistance: 0 to 30 M-ohm. Conductance: 0 to 50 nS. Capacitance: 0.001 nF to 50 mF. Diode Test: 3.1 V. Temperature: -200 °C to 1350 °C (-328 °F to 2462 °F). Frequency: 0.5 Hz to 1000 kHz. Maximum voltage between any terminal and earth ground: 1000 V ac/dc. Display (LCD) Digital: 50000/5000 counts primary display, 5000 counts secondary display; updates 4/second. Display (LCD) Analog: 51 segments, updates 40/second.


Standard Calibration $60.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the FLUKE 87 IV. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.

Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBm (sometimes dBmW) is an abbreviation for the power ratio in decibels (dB) of the measured power referenced to one milliwatt (mW). Zero dBm equals one milliwatt. A 3 dB increase represents roughly doubling the power, a 3 dB decrease, the power is reduced by about one half.

Millimeter-wave is a term that generally refers to frequencies of 26.5 GHz and above. That is where signal wavelengths fall below approximately 10 mm, and thus the terminology changes from centimeters to millimeters.

Power Repeatability
Power Repeatability is the random uncertainty in reproducing the power level after changing and re-setting the power level. The power repeatability is ± half the span (in dB) between the highest and lowest actual power. Note: - The long-term power repeatability can be obtained by taken the power repeatability and power stability into account.

Stability is the extent to which a specified property, characteristic, or parameter of a substance, device, or apparatus, remains fixed with the passage of time or with varying environmental conditions.

Please contact us for your FLUKE 87 IV CALIBRATION and/or FLUKE 87 IV True RMS Handheld Digital Multimeter REPAIR

I'm interested in: 
Calibration Type (Select one):

Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:

What is the description of the problem?

How/when did the problem start?

 (*) Required Fields    For formal quote please fill in all fields.
From (Email):*
Contact Name:*
Address 1:
Address 2:
State/Territory/Province: *
Zip/Postal Code: