BK PRECISION 1623A CALIBRATION and BK PRECISION 1623A REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the BK PRECISION 1623A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another DC Power Supply?
Shop for Comparable Products on our
 used DC Power Supply page

 
   BK PRECISION 1623A   Description / Specification:    
BK PRECISION 1623A 60V 1.5A Single Output Digital Display DC Power Supply

The BK Precision 1623A 0 to 60V, 0 to 1.5A Digital Display DC Power Supply has both coarse and fine voltage and current control knobs and dual LED displays to continuously monitor both output current down to 10 mA and voltage down to 100 mV. Features; Continuously monitor voltage and current output on two digital meters. Connect two supplies in parallel to double the current output. Connect two supplies in series to double the voltage output. Operate continuously at full load without overheating. Fully overload protected. Coarse and fine voltage controls. Constant voltage or constant current operation. Specifications. Output Voltage: 0 to 60 V. Output Current: 0 to 1.5 A. Constant Voltage Operation Voltage Regulation Line (120VAC ±10%, -6%): <= 0.02% + 3 mV. Voltage Regulation Load (no load - full load): <= 0.02% + 3 mV. Recovery Time: <= 500 ms. Ripple & Noise: 0.5 mVrms (Typical). Temperature Coefficient: <= 300 ppm/°C. Constant Current Operation Adjustable Current Limit: 0-100%. Current Regulation Line (120VAC ±10%): <= 0.02% + 3 mA. Current Regulation Load: <= 0.02% + 3 mA. Current Ripple: <= 3 mA. Metering Type: Dual 3-digit LED. Voltmeter Range: 0-60V. Voltmeter Accuracy: ±0.2% +2 digits. Ammeter Range: 0-9.99 A. Ammeter Accuracy: ±0.2% +2 digits. Overload Protection Current, limiting, reverse polarity, overvoltage, short circuit.



 

Standard Calibration $95.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the BK PRECISION 1623A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBc
dBc (decibels relative to the carrier) is the power ratio of a signal to a carrier signal, expressed in decibels. If the dBc figure is positive, then the relative signal strength is greater than the carrier signal strength. If the dBc figure is negative, then the relative signal strength is less than carrier signal strength.

Load Regulation
Load regulation is the capability to maintain a constant voltage (or current) level on the output channel of a power supply despite changes in the supply's load (such as a change in resistance value connected across the supply output).

Power Linearity
When changing the power level and measuring the differences (in dB) between actual and displayed power levels, the power linearity is ± half the span (in dB) between the maximum and the minimum value of all differences.

Settling Time
Settling time of an output device is the time elapsed from the application of an ideal instantaneous step input to the time at which the amplifier output has entered and remained within a specified error band, usually symmetrical about the final value.


Please contact us for your BK PRECISION 1623A CALIBRATION and/or BK PRECISION 1623A 60V 1.5A Single Output Digital Display DC Power Supply REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: