BK PRECISION 9122A CALIBRATION and BK PRECISION 9122A REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the BK PRECISION 9122A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another DC Power Supply?
Shop for Comparable Products on our
 used DC Power Supply page

 
   BK PRECISION 9122A   Description / Specification:   Spec Sheet 
BK PRECISION 9122A 60V 2.5A Single Output Programmable DC Power Supply

The BK Precision 9122A is a Single Output Programmable laboratory grade DC Power Supply. It is designed to meet the needs of today’s applications in R&D design verification, production testing or university labs that require clean and reliable power, high resolution and accuracy and fast transient response time. The numeric keys and rotary knob provide a convenient interface for setting output levels quickly and precisely. Voltage and Current can be set to a maximum resolution of 0.5mV and 0.1mA respectively. Up to 50 parameters can be stored and recalled from internal memory. The 9122A power supply can be remotely controlled from any PC with USB or RS232 interface. Specifications. Output Voltage: 0 – 60 V. Output Current: 0 – 2.5 A. Load Regulation Voltage (±(%of output+offset)): <0.01%+2mV. Load Regulation Current (±(%of output+offset)): <0.05% + 0.5 mA. Line Regulation Voltage (±(%of output+offset)): <0.01% + 2 mV. Line Regulation Current (±(%of output+offset)): <0.05% + 0.05 mA. Programming Resolution Voltage: 1 mV. Programming Resolution Current: 0.1 mA. Readback/ Meter resolution: 0.5 mV, 0.05 mA. Front panel setting resolution: 1 mV, 0.1 mA. Ripple & Noise (20Hz ~20MHz): <= 5 mVp-p, <= 3 mArms. Transient Response: < 150 µs for output to recover to within 75 mV following a change from 100 mA to 1 A. DVM Accuracy: 0.02% + 2 mV (0~12V range), 0.02% + 3 mV (0~40V range). State Storage Memory: 50 user configurable memory locations.



 

Standard Calibration $95.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the BK PRECISION 9122A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Crest Factor
Crest factor or peak-to-average ratio (PAR) is a measurement of a waveform, calculated from the peak amplitude of the waveform divided by the RMS value of the waveform

Linearity
Linearity is the relative difference between the displayed power ratio, Dx/D0, and the actual (true) power ratio Px/P0 caused by changing the displayed power level from the reference level, D0, to an arbitrary displayed level, Dx.

Phase Noise
Phase noise is the frequency domain representation of rapid, short-term, random fluctuations in the phase of a waveform, caused by time domain instabilities. Phase noise (L(f)) is typically expressed in units of dBc/Hz, representing the noise power relative to the carrier contained in a 1 Hz bandwidth centered at a certain offsets from the carrier.

Sensitivity
Sensitivity is the minimum magnitude of input signal required to produce a specified output signal having a specified signal-to-noise ratio, or other specified criteria.


Please contact us for your BK PRECISION 9122A CALIBRATION and/or BK PRECISION 9122A 60V 2.5A Single Output Programmable DC Power Supply REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: