ILX LIGHTWAVE FPM-8200 CALIBRATION and ILX LIGHTWAVE FPM-8200 REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ILX LIGHTWAVE FPM-8200 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Optical Power Meter?
Shop for Comparable Products on our
 used Optical Power Meter page or new Optical Power Meter page

 
   ILX LIGHTWAVE FPM-8200   Description / Specification:    
ILX LIGHTWAVE FPM-8200 Single Channel Optical Power Meter

The ILX Lightwave FPM-8200 Fiber Optic Power Meter was designed for general purpose precision power measurements from fiber optic sources and components. The 8200 features a 75dB dynamic measurement range with a measurement accuracy of 2.5% traceable to NIST calibration standards. In addition to precision power measurements, the FPM-8200 is loaded with standard features such as log/linear display modes, auto-ranging, relative measurement mode, and save/recall functions for storing and retrieving instrument configurations. These features plus an analog output proportional to measured power and an IEEE GPIB interface combine to make the FPM-8200 a versatile laboratory or production test instrument. Specifications. Wavelength Range: 800 to1600 nm. Power Range: -75 to +1.5 dBm. Damage Threshold +10 dBm. Accuracy Reference Conditions: ±2.5%. Accuracy Operating Conditions: ±5.0%. Sensor Type: InGaAs. Noise: <2 pW p-p (1000–1600nm), <4 pW p-p (800–1000nm). Temperature Coefficient: Typical ±0.02%/°C. Linearity: ±0.015 dB, ±2 pW. Analog Output Bandwidth: Typical 0 to10 Hz, Voltage: 0 to10V, Impedance: Typical 1000 ohm.



 

Standard Calibration $160.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ILX LIGHTWAVE FPM-8200. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bit Error Ratio (BER)
Bit Error Ratio (BER) is the ratio of errors caused by the number of bits in a data stream that have been altered due to noise, interference, distoriton or bit synchronization errors.

Flatness
Variation of insertion loss on the passband of an optical device.

Polarization Dependent Loss (PDL)
Polarization Dependent Loss is the difference between the maximum and minimum values of loss due to the variation of the polarization states of light propagating through a device. PDL is expressed in decibels. Calculated by; PDL = 10 log10 (Ep/Es), where EP and ES are the measured diffraction efficiencies for P- and S-plane polarized incident light, respectively.

Return Loss (RL)
Return Loss (RL) is the ratio of the incident power to the reflected power expressed in dB. RL = 10log (Pin/Pback)

Wavelength Resolution
Wavelength Resolution is the smallest possible displayed wavelength increment/decrement.


Please contact us for your ILX LIGHTWAVE FPM-8200 CALIBRATION and/or ILX LIGHTWAVE FPM-8200 Single Channel Optical Power Meter REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: