Custom-Cal has for sale a new UC INSTRUMENTS GM8001B. Also, short calibration turn times minimize downtime and reasonable rates decrease your long-term cost of ownership and minimizes downtime of the UC INSTRUMENTS GM8001B. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Lightwave Measurement System?
Shop for Comparable Products on our
 used Lightwave Measurement System page or new Lightwave Measurement System page

List Price for a new UC INSTRUMENTS GM8001B, $3,200.00   UC INSTRUMENTS GM8001B   Description / Specification:   Spec Sheet 
UC INSTRUMENTS GM8001B 2 Slot Lightwave Multimeter Mainframe

The UC Instruments GM8001B Lightwave Multimeter Display with Two Channels, can be configured as the following. Single or dual channel optical power meter with ranges from +23 to -80 dBm. Single or dual channel tunable laser source, 1525.00 nm to 1610.00 nm. Single or dual channel tunable filter, 1528.00 nm to 1603.00 nm. Optical attenuator, 0 to 60 dB. Single or dual channel optical spectrum analyzer, 1529.00 nm to 1602.00 nm. Optical channel monitor, 1529.00 nm to 1602.00 nm. Loss test set. Return loss test set. Tunable laser source full range sweep with 1 pm minimum step. Capable of being configurated as a passive optical component in a testing system to record testing spectrum curve.

Display: Graphical display 320 X 240 points visible, monochrome.
Display Resolution (Power Sensor Modules): 0.001 dB/dBm,0.001 nW / uW / mW.
Compatibility: GM8001B support GM81xxxxx serial modules.
Data Acquisitions Memory: 16M; 16M bits, flash.
Selectable data averaging time: dependent on sensor module.
Selectable total data averaging time: 20 ms to 23:59:59 h.
Interfaces: RS232, ETHERNET, USB.
Number of Modules: two.


Functional Test $55.00 *
*This is a Web introductory price for one calibration of the UC INSTRUMENTS GM8001B. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.

Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Amplified Spontaneous Emission Source (ASE)
ASE, a process where spontaneously emitted radiation (luminescence) is amplified. In lasers and particularly in high-gain erbium-doped amplifiers, amplified spontaneous emission is usually an unwanted effect. It tends to limit the gain achievable in a single stage of a fiber optic amplifier to the order of 40–50 dB.

Dynamic Range
In a transmission system, the ratio of the overload level to the noise level of the system, usually expressed in dB. Ratio of the highest to lowest detectable signal of a system, expressed in dB.

Optical Power
Optical Power is usually measured in "dBm", or decibels referenced to one miliwatt of power. while loss is a relative reading, optical power is an absolute measurement, referenced to standards. You measure absolute power to test transmitters or receivers and relative power to test loss.

Relative Wavelength Accuracy
When randomly changing the wavelength and measuring the differences between the actual and displayed wavelengths, the relative wavelength accuracy is ± half the span between the maximum and the minimum value of all differences.

Wavelength is a term for the color of light, usually expressed in nanometers (nm) or microns (m). In Fiber Optics the wavelenghts mostly used are in the infrared region where the light is invisible to the human eye.

Please contact us for your new UC INSTRUMENTS GM8001B sale price and/or UC INSTRUMENTS GM8001B CALIBRATION

I'm interested in: 
Calibration Type (Select one):

Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:

What is the description of the problem?

How/when did the problem start?

 (*) Required Fields    For formal quote please fill in all fields.
From (Email):*
Contact Name:*
Address 1:
Address 2:
State/Territory/Province: *
Zip/Postal Code: