NEW UC INSTRUMENTS GM8036 SALES and UC INSTRUMENTS GM8036 CALIBRATION

 
Custom-Cal has for sale a new UC INSTRUMENTS GM8036. Also, short calibration turn times minimize downtime and reasonable rates decrease your long-term cost of ownership and minimizes downtime of the UC INSTRUMENTS GM8036. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Optical Spectrum Analyzer, OSA?
Shop for Comparable Products on our
 used Optical Spectrum Analyzer, OSA page or new Optical Spectrum Analyzer, OSA page

As an alternative New Ridge Technologies offers the NRT-8000, the world’s Smallest Optical Spectrum Analyzer with built in “live wavelength calibration” for C-Band applications.  More
List Price for a new UC INSTRUMENTS GM8036, $9,850.00   UC INSTRUMENTS GM8036   Description / Specification:   Spec Sheet 
UC INSTRUMENTS GM8036 Laser Sweep Optical Spectrum Analyzer

The UC INSTRUMENTS GM8036 Laser Sweep Optical Spectrum Analyzer is a PC control spectrum analyze system for passive components tests. It provides high performance in testing CWDM/DWDM components, GFF, Interleaver, WSS, AWG & PLC components, optical amplifiers, DWDM systems, and performing other general-purpose fiber optical test and measurement applications. This system can be integrated with optical attenuator & power meter, leading to a high performance test system platform with high wavelength accuracy and rapid scan wavelength tunability. Specifications. Tunable Laser Source. Wavelength range: 1525.00 to 1568.00 nm. Output Power: >= 20 mW. Wavelength resolution: 1.0 pm. Absolute wavelength accuracy: +/- 10 pm, tpy. < 5 pm. Relative wavelength accuracy: +/- 5 pm, Typ. +/- 2 pm. Wavelength repeatability: +/- 3 pm, typ. +/- 1 pm. Wavelength stability (typ., 24 hrs at constant temperature: <= +/- 5 pm. Tuning speed: <= 2 ms per step. Power stability: < +/- 0.1 dB, 24 hours. Power repeatability: +/- 0.05 dB. Power linearity: +/- 0.3 dB. Power flatness versus wavelength: 0.3 dB; typ., 0.05dB. Side-mode Suppression ratio: >= 40 dBc. Relative intensity noise(RIN. Typ.): < -135 dB. Power Meter. Wavelength Range: 850 nm to 1620 nm. Power Measurement Range: +13 dBm to -70 dBm. Power Accuracy: < +/- 4%. Power repeatability: < 0.1 dB. Sweep Function. Sweep Mode: Fast Continue Spectrum Sweep. Resolution: 1 PM. Accuracy: 5 PM. Power Display: Peak Power Display. Center Wavelength Function: 3 dB Down Center Wavelength Display. Reference: Function Testing Reference Setup.



 

Standard Calibration $455.00 *
*This is a Web introductory price for one calibration of the UC INSTRUMENTS GM8036. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Amplified Spontaneous Emission Source (ASE)
ASE, a process where spontaneously emitted radiation (luminescence) is amplified. In lasers and particularly in high-gain erbium-doped amplifiers, amplified spontaneous emission is usually an unwanted effect. It tends to limit the gain achievable in a single stage of a fiber optic amplifier to the order of 40–50 dB.

Dynamic Range
In a transmission system, the ratio of the overload level to the noise level of the system, usually expressed in dB. Ratio of the highest to lowest detectable signal of a system, expressed in dB.

Optical Power
Optical Power is usually measured in "dBm", or decibels referenced to one miliwatt of power. while loss is a relative reading, optical power is an absolute measurement, referenced to standards. You measure absolute power to test transmitters or receivers and relative power to test loss.

Relative Wavelength Accuracy
When randomly changing the wavelength and measuring the differences between the actual and displayed wavelengths, the relative wavelength accuracy is ± half the span between the maximum and the minimum value of all differences.

Wavelength
Wavelength is a term for the color of light, usually expressed in nanometers (nm) or microns (m). In Fiber Optics the wavelenghts mostly used are in the infrared region where the light is invisible to the human eye.


Please contact us for your new UC INSTRUMENTS GM8036 sale price and/or UC INSTRUMENTS GM8036 CALIBRATION

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: