NEW POCKETBERT PB10A SALES and POCKETBERT PB10A CALIBRATION

 
Custom-Cal has for sale a new POCKETBERT PB10A. Also, short calibration turn times minimize downtime and reasonable rates decrease your long-term cost of ownership and minimizes downtime of the POCKETBERT PB10A. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Bit Error Rate Tester (BERT)?
Shop for Comparable Products on our
 used Bit Error Rate Tester (BERT) page or new Bit Error Rate Tester (BERT) page

 
List Price for a new POCKETBERT PB10A, $4,150.00   POCKETBERT PB10A   Description / Specification:    
POCKETBERT PB10A Hand Held 10 Gb/s CDR, BERT and Clock Synthesis Unit

The PocketBert pB10A is a fully integrated 10 Gb/s CDR unit with serial 10 GHz clock output and PRBS generator/checker and BER calculator unit. The unit recovers SONET STS192 and 10 Gb/s Ethernet/Fiber Channel clock and data streams in the entire data range from 9.95 Gb/s to 11.32 Gb/s. The build-in PRBS generator and checker enable the unit to test the BER of an electrical or optical link. There is no need for an external reference clock as the unit uses an internal programmable clock generator. If needed an external reference clock can be applied. The unit can also be used as a standalone precision wide range frequency source. It covers the range from 10 MHz to 760 MHz. CDR mode The pB10A receives a serial 10 Gb/s data stream from an O/E converter (APD or PIN) or any other electrical source and recovers clock and data. Typical applications are to extract the 10G clock while testing e.g. optical modules or other electrical PHY components where the testing equipment requires a recovered clock. BIST mode. The pB10A has the capability to generate and check various 10 Gb/s PRBS patterns (231–1, 223–1, 27-1 and custom defined). In this mode the unit can be used to evaluate 10 Gb/s components or links with or without XFP, SFP modules. Provides a cost-effective source to generate non synchronized 10 Gb/s traffic e.g. for DWDM test beds. Features. Data rates from 9.95 Gb/s to 11.35 Gb/s. Recovers clock and data from incoming serial data stream. Integrated pattern generator provides PRBS 231–1, 223–1, 27–1, and custom serial output patterns. Build in PRBS Checker and BER counter/ calculator. Programmable internal clock synthesizer. Complies with XFP MSA standards. 0°C to 50°C temperature range. 1000 V ESD rating. Small sized hand held bench top device (105 mm*144 mm*33 mm). Configuration and management via GUI interface to PC and API interface to access data fields in the GUI. Single wall mount power supply.



 

Standard Calibration $590.00 *
*This is a Web introductory price for one calibration of the POCKETBERT PB10A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Dynamic Range
In a transmission system, the ratio of the overload level to the noise level of the system, usually expressed in dB. Ratio of the highest to lowest detectable signal of a system, expressed in dB.

POS
Packet over SONET/SDH (POS), is a communications protocol for transmitting packets in the form of the Point to Point Protocol (PPP) over SDH or SONET, which are both standard protocols for communicating digital information using lasers or light emitting diodes (LEDs) over optical fibre at high line rates.

TDMA: Time Division Multiple Access
Time Division Multiple Access (TDMA) is a method of sharing a communications carrier by assigning separate time slots to individual users. A channel is defined by a carrier frequency and time slot.


Please contact us for your new POCKETBERT PB10A sale price and/or POCKETBERT PB10A CALIBRATION

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: