ANDO AQ4224(155) REPAIR and CALIBRATION

 
Custom-Cal has a high success rate in the repair of the ANDO AQ4224(155). We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Laser Source (DFB-LD-WDM-BBS)?
Shop for Comparable Products on our
 used Laser Source (DFB-LD-WDM-BBS) page or new Laser Source (DFB-LD-WDM-BBS) page

 
   ANDO AQ4224(155)   Description / Specification:    
ANDO AQ4224(155) WDM LD Unit C-Band

The Ando AQ4224(155) WDM LD Unit is used with an Optical Multimeter mainframe to create a light source unit. Specifications. Selectable wavelength range: 1530 to 1570 nm. Center wavelength, CW light, 0.0dB attenuation, at connecting fiber output point, 1552.5nm ± (n x 0.8 nm): ± 0.1 nm. Applicable fiber: SM (10/125µm). Spectral width: 0.1 nm or less. Wavelength adjustment range: 1 nm. Wavelength adjustment resolution: 0.01 nm. Optical output level: +10 dBm or more. Center wavelength stability, CW light, 0.0 dB attenuation, at connecting fiber output point: Within 0.01 nm. Output level Temperature stability: ±0.3 dB. Output level Time stability: Within ±0.01 dB. Optical connector: SC/APC.



 

Standard Calibration $400.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ANDO AQ4224(155). Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Coherence Length
Average distance over which superimposed waves lose their phase relationships

Linewidth
Linewidth is the width of a spectral line in terms of wavelength, wave number and frequency.

Power Flatness Versus Wavelength
When changing the wavelength at constant power setting and recording the differences between actual and displayed power levels, the power flatness is ± half the span (in dB) between the maximum and the minimum of the measured power levels.

Spectral Width
Spectral Width is the wavelength interval over which the magnitude of all spectral components is equal to or greater than a specified fraction of the magnitude of the component having the maximum value. In optical communications applications, the usual method of specifying spectral width is the full width at half maximum. This is the same convention used in bandwidth, defined as the frequency range where power drops by less than half (at most -3 dB).

Telecom Bands
Optical fiber communications typically operate in a wavelength region corresponding to one of the following Bands. O Band (original): 1260–1360 nm. E Band (extended): 1360–1460 nm. S Band (short wavelengths): 1460–1530 nm. C Band (conventional): 1530–1565 nm. L Band (long wavelengths): 1565–1625 nm. U Band (ultralong wavelengths): 1625–1675 nm


I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: