A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the INSTEK GOM-801H Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another General Meter?
Shop for Comparable Products on our
 used General Meter page

   INSTEK GOM-801H   Description / Specification:    
INSTEK GOM-801H 3 1/2 Digit DC Milli-ohm Meter

The GW Instek GOM-801H milliohm meter is equipped with a 3 1/2 digit 0.5" red LED with comparator indicators. Measurable objects can cover cable joints, earth bonds, switches, motors, transformers and generators. The front panel features seven selectable test ranges, 20 m-ohm to 20 k-ohm. The internal comparator is fully adjustable for the user settable Hi/Lo comparison indicator. Specifications. Test Ranges: 20, 200 m-ohm, 2, 20, 200 ohm, 2k, 20 k-ohm. Test Current (Test Voltage 0.2V): 20 m-ohm / 200 m-ohm, 1 A; 2 ohm, 0.1 A; 200 ohm, 1 mA; 2 k-ohm, 100 uA; 20 k-ohm, 10 uA. Measurement Accuracy: 20 m-ohm, ± (0.2% rdg + 6 digits); 200 m-ohm to 20 k-ohm, ± (0.2% rdg + 4 digits). Setting Accuracy: ± (0.2% + 6 digits). Resolution: 0.01 ohm, 0.1 ohm, 1 ohm, 10 ohm, 100 m-ohm, 1 ohm, 10 ohm. Comparator: HI, LO settable.


Standard Calibration $95.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the INSTEK GOM-801H. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.

Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Carrier Wave (CW)
Carrier Wave or Continuous Wave is a sinusoidal signal without modulation.

A harmonic of a wave is a component frequency of the signal that is an integer multiple of the fundamental frequency, i.e. if the fundamental frequency is f, the harmonics have frequencies 2f, 3f, 4f, . . . etc.

Noise Floor
Noise floor is the measure of the signal created from the sum of all the noise sources and unwanted signals within a measurement system.

Ripple is the small unwanted residual periodic variation of the direct current (dc) output

Please contact us for your INSTEK GOM-801H CALIBRATION and/or INSTEK GOM-801H 3 1/2 Digit DC Milli-ohm Meter REPAIR

I'm interested in: 
Calibration Type (Select one):

Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:

What is the description of the problem?

How/when did the problem start?

 (*) Required Fields    For formal quote please fill in all fields.
From (Email):*
Contact Name:*
Address 1:
Address 2:
State/Territory/Province: *
Zip/Postal Code: