BERKELEY NUCLEONICS CORPORATION 555-4C CALIBRATION and BERKELEY NUCLEONICS CORPORATION 555-4C REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the BERKELEY NUCLEONICS CORPORATION 555-4C Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Pulse Generator?
Shop for Comparable Products on our
 used Pulse Generator page or new Pulse Generator page

 
   BERKELEY NUCLEONICS CORPORATION 555-4C   Description / Specification:    
BERKELEY NUCLEONICS CORPORATION 555-4C 4 Ch Digital Delay-Pulse Generator

The BNC 555-4C Digital Delay-Pulse Generator provides multi-channel 1 ns-resolution timing, delaying, gating, pulsing and syncing functions for a very low price without compromising quality. There are many practical modes of operation and features in addition to the traditional digital delay and pulse generator modes. Each channel provides both delays and widths – so a 4-channel Model 555 provides the same delay and width functionality of competitive 8-channel units. This Digital Delay/Pulse Generator provides precise delays and widths with 1 ns resolution for times up to 100 seconds. These pulses are synchronized to a common trigger or an internal trigger. This is particularly useful where several pulses or gates need to be delayed and timed with respect to each other or the common trigger. In addition to standard Digital Delay and Pulse Generator features, the Model 555 offers many unique modes. Specifications. Timing Delay: 0 to 99.999999999 seconds with 1 ns resolution. Timing Width: 10 ns to 99.999999999 seconds with 1 ns resolution. Accuracy: 1 ns + 0.0001 x time. RMS Jitter: 1 ns. Trig Delay: Ext. Trig to T0 < 250 ns. Trigger Modes: External Trigger, External Gate, Internal(continuous), single shot burst, duty cycle. External Trigger/Gate: Opto-isolated input circuitry. Rate: 0 to 1.0 MHz. Threshold: 3 V. Trigger Slope: Rising or falling edge, selectable. Gate: Active low or active high, selectable. Impedance: 1000 ohms. Internal Rep Rate Generator: Rate: 0.01 Hz to 1 MHz. Accuracy: 1 ns + 0.0001 x period. RMS Jitter: 1 ns. Burst Mode: 1 to 50,000 pulses. Option G: GPIB



 



Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBc
dBc (decibels relative to the carrier) is the power ratio of a signal to a carrier signal, expressed in decibels. If the dBc figure is positive, then the relative signal strength is greater than the carrier signal strength. If the dBc figure is negative, then the relative signal strength is less than carrier signal strength.

Load Regulation
Load regulation is the capability to maintain a constant voltage (or current) level on the output channel of a power supply despite changes in the supply's load (such as a change in resistance value connected across the supply output).

Power Linearity
When changing the power level and measuring the differences (in dB) between actual and displayed power levels, the power linearity is ± half the span (in dB) between the maximum and the minimum value of all differences.

Settling Time
Settling time of an output device is the time elapsed from the application of an ideal instantaneous step input to the time at which the amplifier output has entered and remained within a specified error band, usually symmetrical about the final value.


Please contact us for your BERKELEY NUCLEONICS CORPORATION 555-4C CALIBRATION and/or BERKELEY NUCLEONICS CORPORATION 555-4C 4 Ch Digital Delay-Pulse Generator REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: