A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ILX LIGHTWAVE LDX-3545B Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Laser Diode Controller?
Shop for Comparable Products on our
 used Laser Diode Controller page

   ILX LIGHTWAVE LDX-3545B   Description / Specification:    
ILX LIGHTWAVE LDX-3545B 1/3 A Laser Diode Driver

The ILX Lightwave LDX-3545B Laser Diode Driver is a low noise high stability current source specifically for precision control of low to high power laser diodes. It has a full scale output 3000 mA current range that operates in constant current or constant optical power modes to cover a wide range of laser diode testing and control applications. In addition to precision current control, the LDX-3545B driver also features photodiode current measurement for constant power control, analog modulation for power and wavelength tuning, and an analog output for remote monitoring.

Current Output.
Output Current Range: 1000mA / 3000mA.
Setpoint Resolution: 12 bit (250 μA / 750 μA).
Setpoint Accuracy (% of FS): ±0.1% (±1mA / ±3mA).
Compliance Voltage: 6.0 V.
Temperature Coefficient: <50 ppm/°C.
Short-Term Stability (1 hr): <20 ppm.
Long-Term Stability (24 hr): <50 ppm.

Drive Current Limit Settings.
Range: 0-1010mA / 0-3030mA.
Resolution: 4mA / 12mA.
Accuracy (% of FS): ±1%.

Photodiode Feedback.
Type: Differential.
Reverse Bias: 0-5 V, adjustable.
Photodiode Current Range: 5-9999 μA.
Output Stability: ±0.02%.
Setpoint Accuracy (% of FS): ±0.1% (±5 μA).
Power Modulation BW: 1 kHz.


Standard Calibration $240.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ILX LIGHTWAVE LDX-3545B. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.

Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bit Error Ratio (BER)
Bit Error Ratio (BER) is the ratio of errors caused by the number of bits in a data stream that have been altered due to noise, interference, distoriton or bit synchronization errors.

Variation of insertion loss on the passband of an optical device.

Polarization Dependent Loss (PDL)
Polarization Dependent Loss is the difference between the maximum and minimum values of loss due to the variation of the polarization states of light propagating through a device. PDL is expressed in decibels. Calculated by; PDL = 10 log10 (Ep/Es), where EP and ES are the measured diffraction efficiencies for P- and S-plane polarized incident light, respectively.

Return Loss (RL)
Return Loss (RL) is the ratio of the incident power to the reflected power expressed in dB. RL = 10log (Pin/Pback)

Wavelength Resolution
Wavelength Resolution is the smallest possible displayed wavelength increment/decrement.

Please contact us for your ILX LIGHTWAVE LDX-3545B CALIBRATION and/or ILX LIGHTWAVE LDX-3545B 1/3 A Laser Diode Driver REPAIR

I'm interested in: 
Calibration Type (Select one):

Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:

What is the description of the problem?

How/when did the problem start?

 (*) Required Fields    For formal quote please fill in all fields.
From (Email):*
Contact Name:*
Address 1:
Address 2:
State/Territory/Province: *
Zip/Postal Code: