ARROYO 6310 CALIBRATION and ARROYO 6310 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ARROYO 6310 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Laser Diode Controller?
Shop for Comparable Products on our  used Laser Diode Controller page

 
   ARROYO 6310   Description / Specification:    
ARROYO 6310 1000 mA Laser Diode Driver, 60 W TEC ComboSource

The Arroyo 6310 ComboSource (Laser Driver 1 A / 500 mA, 10 Volt / Temperature Controller 5 Amp, 12 Volt, 60 Watt) offers excellent low current performance, with both a 1 A and 500 mA operating range, making it suitable for very low power applications, such as VCSEL and low power signal diodes. With 1 uA set point resolution and less than 8 uA of noise, the 6310 provides a transparent driver that won't interfere with the performance of your laser or LED devices. One of the valable features of the 6310 is the dual range capability, which allows operation in either a 500 mA range or 1000 mA range. The 6310 optically and electrically isolates it's isolated inputs and outputs, preventing device-damaging ground loops. The 6310 adds a 60 watt temperature controller. Specifications. Laser Current Range: 0 – 1000 or 0 – 500 mA. Resolution: 0.05 mA. Setpoint Accuracy: (±[% set + mA]) 0.025% + 0.3. Measurement Accuracy (±[% reading + mA]): 0.025% + 0.3. Stability (ppm, time): < 10, 1 hour. Compliance Voltage: 10 V. Modulation Bandwidth: 200 kHz. Photodiode Range: 5 – 5,000 µA. Resolution: 0.1 µA. Setpoint Accuracy: (±[% set+µA]) 0.05% + 1. Measurement Accuracy: (±[% reading+µA]) 0.05% + 1. Laset Voltage Range: 0 – 10 V. Resolution: 0.001 V. Setpoint Accuracy (±[% set+V]): 0.05% + 0.005. Measurement Accuracy (±[% reading+V]): 0.05% + 0.005. Temperature Controller Power: 5A, 12V, 60W. Stability (1 hour, °C) 0.002. Stability (24 hours, °C): 0.005. Temperature Range: -99 to 250 °C. Resolution: 0.01 °C. Computer Interface: USB 2.0 Full Speed (USB Type B), RS-232 (DB-9, male).



 

Standard Calibration $405.00 *
*This is a Web introductory price for one calibration of the ARROYO 6310. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Absolute Wavelength Accuracy
Absolute Wavelength Accuracy is the maximum difference between the actual wavelength and the displayed wavelength of the Optical Source. Wavelength is defined as wavelength in vacuum.

Decibel (dB)
A unit of measurement of optical power which indicates relative power. A -10 dB means a reduction in power by 10 times, -20 dB means another 10 times or 100 times overall, -30 means another 10 times or 1000 times overall and so on.

Nanometer (nm)
A unit of measure used to measure wavelength of light, meaning one one-billionth of a meter

Relative Intensity Noise (RIN)
Relative intensity noise (RIN), describes the instability in the power level of a laser. The noise term is important to describe lasers used in fiber-optic communication and LIDAR remote sensing. It is the square of the (spectrally resolved) RMS optical power amplitude divided by the measurement bandwidth and the square of the average optical power, expressed in dB/Hz.

Total Return loss
In an optical fiber, the loss that takes place at any discontinuity of refractive index, especially at an air-glass interface such as a fiber endface, at which a fraction of the optical signal is reflected back toward the source. RL = - 10log10 (Preflected/Preference)

Please contact us for your ARROYO 6310 CALIBRATION and/or ARROYO 6310 1000 mA Laser Diode Driver, 60 W TEC ComboSource REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: