AEROFLEX-IFR FM/AM-1100S CALIBRATION and AEROFLEX-IFR FM/AM-1100S REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the AEROFLEX-IFR FM/AM-1100S Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Communication Analyzer?
Shop for Comparable Products on our
 used Communication Analyzer page or new Communication Analyzer page

 
   AEROFLEX-IFR FM/AM-1100S (1100S)   Description / Specification:    
AEROFLEX-IFR FM/AM-1100S Communications Service Monitor

The IFR FM/AM-1100S Communications Service Monitor is a digitally synthesized AM/FM/SSB receiver and signal generator. All components within the unit are solid state, with the exception of the CRT and several switches. The receiver is a quadruple conversion receiver, capable of receiving communication signals from 300 kHz to 999.9999 MHz. The signal generator is capable of generating modulated or unmodulated signals from 1 kHz to 999.9999 MHz. Specifications. RF Signal Generator Frequency Range: 100 Hz to 999.9999 MHz in 100-Hz steps. Frequency Accuracy: 5 x 10^-7 (±0.00005%). RF Output Power: -130 dBm to -35 dBm (1 kHz to 1 GHz). RF Output Power Accuracy: -110 to –35 dBm ±2.5 dB to 400 MHz, ±3.0 dB above 400 MHz. Oscilloscope Vertical Bandwidth: DC to 1 MHz (at 3-dB bandwidth). Horizontal Sweep Rate: 10 ms, 1 ms, 0.1 ms, 0.01 ms per division. Spectrum Analyzer Frequency Range: 1 MHz to 1 GHz. Dynamic Range: 70 dB (–30 dBm to –100 dBm). Bandwidth Resolution: 30 kHz. Audio Generator Frequency Range: 10.0 Hz to 20 kHz (Variable Tone), 1 kHz (Fixed Tone). Receiver/Monitor Frequency Range: 300 kHz to 999.9999 MHz. Resolution: 100 Hz. 10 dB Sinad Sensitivity: 2 µV (typical). Power Monitor Frequency Range: 1 MHz to 1000.00 MHz. Power Ranges: 0 to 4, 0 to 40 and 0 to 400 watts. Accuracy 1 to 600 MHz: ±7% of reading plus 3% of full scale. Accuracy 600 MHz to 1000.00 MHz: ±20% of reading plus 3% of full scale. Input Power: 100 watts continuous; 325 watts maximum.



 

Standard Calibration $590.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the AEROFLEX-IFR FM/AM-1100S. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bandwidth
Bandwidth is the difference between the upper and lower frequencies in a contiguous set of frequencies within which a fiber optic component, link or network will operate.

Multimode Fiber
Multimode Fiber has a large core (almost always 62.5 microns - a micron is one one millionth of a meter - but sometimes 50 microns) and is used with LED sources at wavelengths of 850 and 1300 nm for short distance, lower speed networks like LANs. Both multimode and singlemode fiber have an outside diameter of 125 microns - about 5 thousandths of an inch - just slightly larger than a human hair.

SDH
Synchronous Digital Hierarchy (SDH) is an international digital telecommunications network hierarchy which standardises transmission around the bit rate of 51.84 megabits per second, which is also called STS-1. Multiples of this bit rate comprise higher bit rate streams. Thus STS-3 is 3 times STS-1, STS-12 is 12 times STS-1, and so on. STS-3 is the lowest bit rate expected to carry ATM traffic, and is also referred to as STM-1 (Synchronous Transport Module-Level 1). The SDH specifies how payload data is framed and transported synchronously across optical fibre transmission links without requiring all the links and nodes to have the same synchronized clock for data transmission and recovery.


Please contact us for your AEROFLEX-IFR FM/AM-1100S CALIBRATION and/or AEROFLEX-IFR FM/AM-1100S Communications Service Monitor REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: