BK PRECISION 4040B CALIBRATION and BK PRECISION 4040B REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the BK PRECISION 4040B Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Function Generator?
Shop for Comparable Products on our
 used Function Generator page or new Function Generator page

 
   BK PRECISION 4040B   Description / Specification:   Spec Sheet 
BK PRECISION 4040B 20 MHz DDS Sweep Function Generators

The B&K Precision 4040B is a 20 MHz DDS (direct digital synthesis) function generator that generates stable and precise sine, square, and triangle waveforms. It provides variable output voltages from 0 to 10 Vpp into 50 ohms (up to 20 Vpp into open circuit), linear and logarithmic sweep, AM/FM modulation, built-in counter, and a continuously variable DC offset that allows the output to be injected directly into circuits at the correct bias level. Separate output amplitude and DC offset amplifiers let you set a large DC offset (e.g. ± 4.99 V ) with a small amplitude output signal (e.g. 10 mV). Specifications. Frequency Range: 0.01 Hz to 20 MHz (Sine, Square), 0.01 Hz to 2 MHz (Triangle). Resolution: 6 digits(square wave) or 10 mHz. Accuracy: 0.01% ± 0.006 Hz. Amplitude Range: 10 mVpp to 10 Vpp (into 50 ohms), 20 mVpp to 20 Vpp (open circuit). Amplitude Resolution: 3 digits (1,000 counts). Amplitude Accuracy: ± 2% ± 20 mV of programmed output from 1.01 V – 10 V. Flatness: ± 0.5 dB to 1 MHz, ± 1 dB to 20 MHz. Harmonic Distortion (for sine wave at 5 Vp-p into 50 ohms): < -60 dBc (0 – 1 MHz), <-50 dBc (1 MHz – 5 MHz), <-45 dBc (5 MHz – 12 MHz), <-50 dBc (12 MHz – 20 MHz). Square Rise/Fall Time: <= 20 ns (10% to 90% at full amplitude into 50 ohms). Duty Cycle Square: 20% - 80% to 2 MHz. Duty Cycle Triangle: 1% - 99% in 1% steps, up to 200 kHz. Operating Modes: Continuous, Triggered, Gate, Burst, Trigger Source. Amplitude Modulation Internal: 0.1 Hz – 20 kHz sine, square, or triangle waveform. Frequency Modulation Internal: 0.1 Hz – 20 kHz sine, square, or triangle waveform. Counter Range: 50 Hz to 25 MHz. Counter Resolution: Auto ranging, up to 8 digits. Counter Accuracy ± 0.02% ± 2 digits. Memory Storage: 20 instrument settings.



 

Standard Calibration $135.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the BK PRECISION 4040B. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Available Gain
Available Gain is the ratio, at a specific frequency, of power available from the output to the power in from the source.

Decibel (dB)
A unit of measurement of power which indicates relative power. A -10 dB means a reduction in power by 10 times, -20 dB means another 10 times or 100 times overall, -30 means another 10 times or 1000 times overall and so on.

Mismatch Uncertainty
Mismatch Uncertainty is caused by re-reflections between one device (the source) and the device that follows it (the load).

Pulse Power
Pulse Power, the energy transfer rate is averaged over the pulse width. Pulse width is considered to be the time between the 50 percent risetime/falltime amplitude points. Pulse power averages out any aberrations in the pulse envelope such as overshoot or ringing.


Please contact us for your BK PRECISION 4040B CALIBRATION and/or BK PRECISION 4040B 20 MHz DDS Sweep Function Generators REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: