Custom-Cal has a high success rate in the repair of the TRANSISTOR DEVICES MCL488 100-30-175. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the TRANSISTOR DEVICES MCL488 100-30-175 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Electronic Load?
Shop for Comparable Products on our
 used Electronic Load page

   TRANSISTOR DEVICES MCL488 100-30-175   Description / Specification:    
TRANSISTOR DEVICES MCL488 100-30-175 30 A, 175 W Electronic Load Module

The TDI MCL488 100-30-175 175W Electronic Load Module can be paralleled using the paralleling straps provided, configured either from the front panel or computer bus, and controlled as a single channel. 350 watt and 175 watt modules may be used in any configuration, providing maximum flexibility. All functions that are available for a single module are available in the multi-channel configuration. Complete operation including Constant Current, Constant Resistance, Constant Power and Constant Voltage is available when operating a single module or when the modules are paralleled. All functions, including linking modules in parallel through software, are programmed via the user-friendly front panel, IEEE-488 bus or the optional RS232 interface. The front panel simultaneously displays voltage, current, wattage and mode for each installed module. Specifications. Constant Current: 0 to 30A. Prog. Accuracy: ±0.25%. Regulation: 30 mA. Constant Resistance: Amps/Volt or Ohms. High A/V Mode: 0 - 30 A/V. Low Resistance Mode: Infinite - 0.0333 ohms. Low A/V Mode: 0 - 3 A/V. High Resistance Mode: Infinite - 0.333 ohms. Prog. Accuracy: ±3% of Full Scale. Regulation: ±3% of Full Scale. Constant Voltage: 0 - 100V. Prog. Accuracy: ±0.50%. Regulation: ±0.15V. Constant Power: 0 to 175 Watts. Prog. Accuracy: 5 Watts. Regulation: 5 Watts. Short Circuit: 0.06 ohm Max.


Standard Calibration $455.00 *
*This is a Web introductory price for one calibration of the TRANSISTOR DEVICES MCL488 100-30-175. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.

Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Available Gain
Available Gain is the ratio, at a specific frequency, of power available from the output to the power in from the source.

Decibel (dB)
A unit of measurement of power which indicates relative power. A -10 dB means a reduction in power by 10 times, -20 dB means another 10 times or 100 times overall, -30 means another 10 times or 1000 times overall and so on.

Mismatch Uncertainty
Mismatch Uncertainty is caused by re-reflections between one device (the source) and the device that follows it (the load).

Pulse Power
Pulse Power, the energy transfer rate is averaged over the pulse width. Pulse width is considered to be the time between the 50 percent risetime/falltime amplitude points. Pulse power averages out any aberrations in the pulse envelope such as overshoot or ringing.

Please contact us for your TRANSISTOR DEVICES MCL488 100-30-175 REPAIR and/or TRANSISTOR DEVICES MCL488 100-30-175 30 A, 175 W Electronic Load Module CALIBRATION

I'm interested in: 
Calibration Type (Select one):

Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:

What is the description of the problem?

How/when did the problem start?

 (*) Required Fields    For formal quote please fill in all fields.
From (Email):*
Contact Name:*
Address 1:
Address 2:
State/Territory/Province: *
Zip/Postal Code: