KAELUS IQA-2101C CALIBRATION and KAELUS IQA-2101C REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the KAELUS IQA-2101C Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Cellular Test Set? Shop for Comparable Products on our   new Cellular Test Set page

 
   KAELUS IQA-2101C   Description / Specification:    
KAELUS IQA-2101C UMTS (3rd & 7th order)Passive Intermodulation (PIM) analyzer

The Kaelus iQA-2101C Passive Intermodulation (PIM) Analyzer is a feature rich, high power PIM test solution. This field proven analyzer enables network operators to improve site performance by finding and eliminating sources of passive intermodulation at the cell site. The design includes an integrated panel PC with intuitive touch screen interface for performing tests and generating site reports. This version ships from the factory enabled to support Range to Fault (RTF) technology: with the purchase of an optional RTF module, operators are able to activate RTF mode within the iQA user software to accurately measure the distance to return loss faults as well as the distance to PIM faults at the cell site.
Specifications.

System;
Measurement method: Reverse (reflected) PIM, 3rd, 5th, 7th, 9th and 11th order.
Residual PIM: < -115 dBm / -158 dBc max (<-125 dBm / -168 dBc typ) (x2 @ 20W).
User interface ports:
 3x USB,
 x1 LAN,
 1x RF output (7-16 DIN female),
 1x monitor port (N female).
Display: 8.4in (213mm) touch screen display.

Transmitter;
Transmit frequencies: 2110-2170 MHz.
Frequency increment: 50 kHz.
Frequency accuracy: ± 5ppm (max), aging ± 1ppm (max) after first year.
Power per tone (adjustable): 2x 2 to 20W (+33 to +43dBm).
Power accuracy (per tone): ± 0.5dB (max).

Receiver;
Receive band (50kHz steps): 1920-2080 MHz.
Measurement noise floor: < -128 dBm.
Measurement range: -50 dBm to -128 dBm.



 



Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Decibel (dB)
A unit of measurement of optical power which indicates relative power. A -10 dB means a reduction in power by 10 times, -20 dB means another 10 times or 100 times overall, -30 means another 10 times or 1000 times overall and so on.

PDH
Plesiochronous Digital Hierarchy (PDH) is a transmission system for voice communication using plesiochronous synchronisation. The transmitter adds dummy information bits to allow multiple channels to be bit interleaved. The receiver discards these bits once the signals have been demultiplexed. PDH combines multiple 2 Mb/s (E1) channels in Europe and 1.544 Mb/s (DS1) channels in the US and Japan.

Spectral Width
Spectral Width is the wavelength interval over which the magnitude of all spectral components is equal to or greater than a specified fraction of the magnitude of the component having the maximum value. In optical communications applications, the usual method of specifying spectral width is the full width at half maximum. This is the same convention used in bandwidth, defined as the frequency range where power drops by less than half (at most -3 dB).


Please contact us for your KAELUS IQA-2101C CALIBRATION and/or KAELUS IQA-2101C UMTS (3rd & 7th order)Passive Intermodulation (PIM) analyzer REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: