Custom-Cal has for sale a new PROTEK A434L. Also, short calibration turn times minimize downtime and reasonable rates decrease your long-term cost of ownership and minimizes downtime of the PROTEK A434L. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Cellular Test Set? Shop for Comparable Products on our   new Cellular Test Set page

List Price for a new PROTEK A434L, $4,500.00   PROTEK A434L   Description / Specification:   Spec Sheet 
PROTEK A434L 4 GHz Antenna and Cable Analyzer

The Protek A434L is a new antenna and cable analyzer designed for use in the field offering the four measurement capabilities such as VSWR, cable Loss, DTF (Distance to Fault) and power meter with convenient short-cut buttons. It has a 7" TFT Sun-light Readable Screen. Specifications. Frequency Range: 5 MHz to 4 GHz. Max. Input Power: +25 dBm Damage level. Frequency Accuracy: < ±3 ppm. Frequency Resolution: 10 kHz. Impedance: 50 ohm. Scan Speed: < 1 msec/data point. Display: Single & Dual mode. Test Port: N Type Female. Test Curve Storage, Screen Storage, Setup Storage: Internal Minimum 512MB, External Limited by size of USB (32G). Number of Data Points: 126, 251, 501, 1001, 2001. Return Loss Range: 0 to -60 dB. VSWR Range: 1 to 65. Cable Loss Range: 0 to -30 dB, 0.01 dB Resolution. Interference Immunity On-Frequency: +10 dBm. Interference Immunity On-Channel: +20 dBm. DTF Return Loss Display Range: 0 to -60 dB. DTF Distance Range: 0 to 1250 m (4125 ft). DTF VSWR Display Range: 0 to 65. Optional Power Meter; Frequency Range: 20 MHz to 3.8 GHz. Sensor Type: Average. Peak Power Sensor: -40 dBm to +10 dBm. Accuracy: ±7%. Test Port: N Type Female.


Standard Calibration $350.00 *
*This is a Web introductory price for one calibration of the PROTEK A434L. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.

Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Data Rate
Data Rate is the maximum number of bits of information which can be transmitted per second, as in a data transmission link. Typically expressed as megabits per second (Mbps).

Optical Signal-to-noise Ratio (OSNR)
Optical Signal-to-noise ratio is the ratio between the signal power and the noise power in a given bandwidth. Most commonly a reference bandwidth of 0.1 nm is used. This bandwidth is independent from the modulation format, the frequency and the receiver. For instance a OSNR of 20dB/0.1nm could be given, even the signal of 40 GBit DPSK would not fit in this bandwidth. OSNR is measured with a Optical Spectrum Analyzer. It is generally measured at the wavelength of interest.

Synchronous Optical NETwork (SONET) is a fiber-optic transmission system for high-speed digital traffic. Employed by telephone companies and common carriers, speeds range from 51 Mbps to 40 Gbps. SONET is an intelligent system that provides advanced network management and a standard optical interface. Specified in the Broadband ISDN (B-ISDN) standard, SONET backbones are widely used to aggregate T1 and T3 lines. The European counterpart to SONET is the Synchronous Digital Hierarchy, and the term "SONET/SDH" is widely used when referring to SONET

Please contact us for your new PROTEK A434L sale price and/or PROTEK A434L CALIBRATION

I'm interested in: 
Calibration Type (Select one):

Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:

What is the description of the problem?

How/when did the problem start?

 (*) Required Fields    For formal quote please fill in all fields.
From (Email):*
Contact Name:*
Address 1:
Address 2:
State/Territory/Province: *
Zip/Postal Code: