Custom-Cal has for sale a new UC INSTRUMENTS CA9806. Also, short calibration turn times minimize downtime and reasonable rates decrease your long-term cost of ownership and minimizes downtime of the UC INSTRUMENTS CA9806. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Bit Error Rate Tester (BERT)?
Shop for Comparable Products on our
 used Bit Error Rate Tester (BERT) page or new Bit Error Rate Tester (BERT) page

List Price for a new UC INSTRUMENTS CA9806, $18,800.00   UC INSTRUMENTS CA9806   Description / Specification:    
UC INSTRUMENTS CA9806 4 Ch 15.0 Gb/s Pulse Pattern Generator and Error Detector

The UC Instruments CA9806 is a high performance, flexible four channel Pulse Pattern Generator and Error Detector that can operate from 1.0 to 15.0 Gb/s. It is also a standalone Bit Error Rate test solution that incorporates an internal full rate clock synthesizer. Its small size allows it to be placed close to the device under test, it can also be placed further away using the TX driver pre and post emphasis controls features to compensate for cable and interconnect losses. It also has a non destructive, integrated eye outline capture feature along with a quick eye height and width measurement capability. Build-in 8.5 to 15 Gb/s eye diagram testing function. The CA9806 can be used for compliance testing of Ethernet, Fiber Channel, InfiniBand, PCIE, SONET and proprietary link standards. Features. 1.0 to 15.0 Gb/s and beyond pulse pattern generator. PRBS 2^7-1, 2^9-1, 2^11-1, 2^15-1, 2^23-1, 2^31-1, 2^58-1. Four channel NRZ PPG and ED. Internal clock synthesizer. Adjustable clock output. Typical JRMS of 1 ps and JPP of 7 ps. TX level from 25 mV to 1500 m V PPDIFF. Eye monitor from 8.5 to 15.0 Gbps operation. Pre and Post cursor emphasis. 64 bit programmable fixed pattern. Pre-emphasis output signal functionality. PPM offset control.


Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Decibel (dB)
A unit of measurement of optical power which indicates relative power. A -10 dB means a reduction in power by 10 times, -20 dB means another 10 times or 100 times overall, -30 means another 10 times or 1000 times overall and so on.

Plesiochronous Digital Hierarchy (PDH) is a transmission system for voice communication using plesiochronous synchronisation. The transmitter adds dummy information bits to allow multiple channels to be bit interleaved. The receiver discards these bits once the signals have been demultiplexed. PDH combines multiple 2 Mb/s (E1) channels in Europe and 1.544 Mb/s (DS1) channels in the US and Japan.

Spectral Width
Spectral Width is the wavelength interval over which the magnitude of all spectral components is equal to or greater than a specified fraction of the magnitude of the component having the maximum value. In optical communications applications, the usual method of specifying spectral width is the full width at half maximum. This is the same convention used in bandwidth, defined as the frequency range where power drops by less than half (at most -3 dB).

Please contact us for your new UC INSTRUMENTS CA9806 sale price and/or UC INSTRUMENTS CA9806 CALIBRATION

I'm interested in: 
Calibration Type (Select one):

Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:

What is the description of the problem?

How/when did the problem start?

 (*) Required Fields    For formal quote please fill in all fields.
From (Email):*
Contact Name:*
Address 1:
Address 2:
State/Territory/Province: *
Zip/Postal Code: