NEW BERKELEY NUCLEONICS CORPORATION 7070 SALES and BERKELEY NUCLEONICS CORPORATION 7070 CALIBRATION

 
Custom-Cal has for sale a new BERKELEY NUCLEONICS CORPORATION 7070. Also, short calibration turn times minimize downtime and reasonable rates decrease your long-term cost of ownership and minimizes downtime of the BERKELEY NUCLEONICS CORPORATION 7070. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another RF Noise Analyzer? Shop for Comparable Products on our   new RF Noise Analyzer page

 
List Price for a new BERKELEY NUCLEONICS CORPORATION 7070, $38,500.00   BERKELEY NUCLEONICS CORPORATION 7070   Description / Specification:   Spec Sheet 
BERKELEY NUCLEONICS CORPORATION 7070 7 GHz PC-controlled Phase Noise Analyzer

The Berkeley Nucleonics 7070 7 GHz Signal Source Analyzer is an integrated solution that offers an indispensable set of measurement functions for evaluating signal sources ranging from VHF to microwave frequencies such as crystal oscillators, PLL synthesizers, clocks, phaselocked VCOs, DROs, and others. This flexible instrument comprises a two-channel cross-correlation system with two internal tunable references sources and allows also measurements with external references. Using proven cross-correlation measurement procedures and self-calibration routines, reproducible, and accurate measurements are obtained even under changing environmental conditions. Fully automated frequency acquisition and self-calibration greatly simplify use and applicability of the instrument, resulting in much faster measurement throughput and greater ease-of-use in actual operation. The 7070 is a compact and powerful instrument available with LAN (VXI-11), USBTMC, or with GPIB (optionally) interfaces. Platform independent intuitive graphical user interface (GUI), API library, and powerful SCPI command language set is available. Specifications. Frequency Range: 5 MHz to 7.0 GHz. Offset range: 0.01 Hz to 50 MHz. PhN Sensitivity at 1 GHz, 1 average: -52 (-80 opt. LN) @ 1 Hz, -85 (-100 opt. LN) @ 10 Hz, -135 @ 1 kHz, -145 @ 10 kHz, -155 @ 100 kHz, -170 @ 1 MHz. Measurement Speed (1 Hz start ; per correlation): 10 seconds. Input power range: -15 to +20 dBm, +26 dBm is damage level. Uncertainty: <3 dB @ <100 Hz, <2 dB @ >100 Hz. Options. -G, GPIB interface. -LN, Ultra Low Noise Internal Synthesizer.



 

Standard Calibration $775.00 *
*This is a Web introductory price for one calibration of the BERKELEY NUCLEONICS CORPORATION 7070. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBm
dBm (sometimes dBmW) is an abbreviation for the power ratio in decibels (dB) of the measured power referenced to one milliwatt (mW). Zero dBm equals one milliwatt. A 3 dB increase represents roughly doubling the power, a 3 dB decrease, the power is reduced by about one half.

Noise Figure
Noise Figure the ratio of the signal-to-noise power ratio at the input to the signal-to-noise power ratio at the output.

Standing Wave Ratio (SWR)
Standing wave ratio (SWR) is the ratio of the amplitude of a partial standing wave at an antinode (maximum) to the amplitude at an adjacent node (minimum).


Please contact us for your new BERKELEY NUCLEONICS CORPORATION 7070 sale price and/or BERKELEY NUCLEONICS CORPORATION 7070 CALIBRATION

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: