INSTEK GPI-825 CALIBRATION and INSTEK GPI-825 REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the INSTEK GPI-825 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

 

 
   INSTEK GPI-825   Description / Specification:   Spec Sheet 
INSTEK GPI-825 5KV 500 VA AC Withstanding Voltage / Insulation Tester

The GW Instek GPI-825 Safety Tester offers an economical solution for the most frequently used electrical safety requirement, the AC withstanding test. It provides a reliable and accurate test environment for the operator through a number of safety-oriented features such as a zero turn-on switch, remote control functions, and a PASS/FAIL signal output. The GPI-825 includes Insulation Resistance testing. Specifications. AC Output Voltage: 0.2 kV to 5 kV. AC V Regulation: 15%. AC V Accuracy: ±(3% rdg 3counts). AC Trip Current: 0.3 to 100 mA. AC Current Accuracy: ±(5% rdg +2 counts). IR Output Voltage: DC 500V / 1000V. IR Resistance: 1 to 2000 M-ohm. Resistance Accuracy: 1 to 500 M-ohm ±(5% rdg + 2 counts), 501 M-ohm to 2000 M-ohm ±(10% rdg +2 counts). Test Time: 1 to 180 seconds or continual. Arc Detection: 0.3 to 100 mA. Digital Display: Voltage & Current 3 1/2 digits, 0.39" LED, Timer 3 digits 0.39" LED.



 

Standard Calibration $225.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the INSTEK GPI-825. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Crest Factor
Crest factor or peak-to-average ratio (PAR) is a measurement of a waveform, calculated from the peak amplitude of the waveform divided by the RMS value of the waveform

Linearity
Linearity is the relative difference between the displayed power ratio, Dx/D0, and the actual (true) power ratio Px/P0 caused by changing the displayed power level from the reference level, D0, to an arbitrary displayed level, Dx.

Phase Noise
Phase noise is the frequency domain representation of rapid, short-term, random fluctuations in the phase of a waveform, caused by time domain instabilities. Phase noise (L(f)) is typically expressed in units of dBc/Hz, representing the noise power relative to the carrier contained in a 1 Hz bandwidth centered at a certain offsets from the carrier.

Sensitivity
Sensitivity is the minimum magnitude of input signal required to produce a specified output signal having a specified signal-to-noise ratio, or other specified criteria.


Please contact us for your INSTEK GPI-825 CALIBRATION and/or INSTEK GPI-825 5KV 500 VA AC Withstanding Voltage / Insulation Tester REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: