KAELUS IQA-1921C CALIBRATION and KAELUS IQA-1921C REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the KAELUS IQA-1921C Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Cellular Test Set? Shop for Comparable Products on our   new Cellular Test Set page

 
   KAELUS IQA-1921C   Description / Specification:    
KAELUS IQA-1921C Dual band PCS/AWS Passive Intermodulation (PIM) analyzer

The Kaelus iQA-1921C Passive Intermodulation (PIM) Analyzer is a feature rich, high power PIM test solution. This field proven analyzer enables network operators to improve site performance by finding and eliminating sources of passive intermodulation at the cell site. The design includes an integrated panel PC with intuitive touch screen interface for performing tests and generating site reports. This version ships from the factory enabled to support Range to Fault (RTF) technology: with the purchase of an optional RTF module, operators are able to activate RTF mode within the iQA user software to accurately measure the distance to return loss faults as well as the distance to PIM faults at the cell site.
Specifications.

System;
Measurement method: Reverse (reflected) PIM, 3rd, 5th, 7th, 9th and 11th order.
Residual PIM: < -115 dBm / -158 dBc max (<-125 dBm / -168 dBc typ) (x2 @ 20W).
User interface ports:
 3x USB,
 x1 LAN,
 1x RF output (7-16 DIN female),
 1x monitor port (N female).
Display: 8.4in (213mm) touch screen display.

Transmitter;
Transmit frequencies: 1930-1990MHz/2110-2155MHz.
Frequency increment: 50 kHz.
Frequency accuracy: ± 5ppm (max), aging ± 1ppm (max) after first year.
Power per tone (adjustable): 2x 2 to 20W (+33 to +43dBm).
Power accuracy (per tone): ± 0.5dB (max).

Receiver;
Receive band (50kHz steps): 1710-1755MHz/1850-1910MHz.
Measurement noise floor: < -128 dBm.
Measurement range: -50 dBm to -128 dBm.



 



Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bandwidth
Bandwidth is the difference between the upper and lower frequencies in a contiguous set of frequencies within which a fiber optic component, link or network will operate.

Multimode Fiber
Multimode Fiber has a large core (almost always 62.5 microns - a micron is one one millionth of a meter - but sometimes 50 microns) and is used with LED sources at wavelengths of 850 and 1300 nm for short distance, lower speed networks like LANs. Both multimode and singlemode fiber have an outside diameter of 125 microns - about 5 thousandths of an inch - just slightly larger than a human hair.

SDH
Synchronous Digital Hierarchy (SDH) is an international digital telecommunications network hierarchy which standardises transmission around the bit rate of 51.84 megabits per second, which is also called STS-1. Multiples of this bit rate comprise higher bit rate streams. Thus STS-3 is 3 times STS-1, STS-12 is 12 times STS-1, and so on. STS-3 is the lowest bit rate expected to carry ATM traffic, and is also referred to as STM-1 (Synchronous Transport Module-Level 1). The SDH specifies how payload data is framed and transported synchronously across optical fibre transmission links without requiring all the links and nodes to have the same synchronized clock for data transmission and recovery.


Please contact us for your KAELUS IQA-1921C CALIBRATION and/or KAELUS IQA-1921C Dual band PCS/AWS Passive Intermodulation (PIM) analyzer REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: