NEW BERKELEY NUCLEONICS CORPORATION 645 SALES and BERKELEY NUCLEONICS CORPORATION 645 CALIBRATION

 
Custom-Cal has for sale a new BERKELEY NUCLEONICS CORPORATION 645. Also, short calibration turn times minimize downtime and reasonable rates decrease your long-term cost of ownership and minimizes downtime of the BERKELEY NUCLEONICS CORPORATION 645. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Function Generator?
Shop for Comparable Products on our
 used Function Generator page or new Function Generator page

 
List Price for a new BERKELEY NUCLEONICS CORPORATION 645, $1,425.00   BERKELEY NUCLEONICS CORPORATION 645   Description / Specification:   Spec Sheet 
BERKELEY NUCLEONICS CORPORATION 645 50 MHz Function/Arbitrary Waveform Generator

The BNC 645 50MHz Function/Arbitrary Waveform Generator delivers many advanced features and user modes. New DDS+ technology embraces advancements in the semiconductor industry and leverages state-of- the-art components for both standard and complex functions.
The Model 645 can generate variable-edge pulses at rates up to 10MHz. From the front panel or through remote communications, the user may vary the period, pulse width and amplitude. The pulse parameters may be stored in the unit or on your computer for later recall.
The BNC 645 offers 14-bit resolution and a 125 MSa/s sampling rate, giving users enough control of their waveforms for most applications. It will storage of up to 5 waveforms concurrently ( 4 waveforms (4 x 256K points) in nonvolatile memory and 1 waveform in volatile memory.
Specifications.

Capability.
Standard Wave forms: Sine, Square, Ramp, Triangle, Pulse, Noise, DC .
Built-in arbitrary waveforms: Exponential Rise and Fall, Negative ramp, Sin (x)/x, Cardiac.
Modulation Types: AM, FM, PM, FSK, PWM, Sweep and Burst.

Waveform Characteristics.
Sine
Frequency: 1 µHz 50 MHz.
Amplitude: 0.1 dB (< 100 KHz).
Flatness: 0.15dB (<5MHz).
Total Harmonic Distortion: DC to 20 KHz, Output ≥ 0.5Vpp THD+N ≤0.06%.
Square
Frequency: 1 µHz to 25 MHz .
Rise/ Fall time: < 10 ns .
Overshoot: < 2%.
Variable Duty Cycle: 20% to 80% (to 10MHz), 40% to 60% (to 25 MHz).
Asymmetry: 1% of period + 5 ns (@ 50% duty).
Ramp, Triangle
Frequency: 1 µHz to 200 KHz.
Linearity: < 0.1% of peak output.
Symmetry: 0.0% ~ 100.0%.
Noise
Bandwitdh: 20 MHz Typical.
Arbitrary
Frequency: 1 µHz to 10MHz.
Length: 2 to 256 K.
Resolution: 14 bits (Including sign).
Sample Rate: 125 MSa/s.
Min Rise/ Fall: 30 ns typical.
Linearity: < 0.1% of peak output.
Settling Time: <250 ns to 0.5% of final value.

Common Characteristics.
Frequency Resolution: 1µHz.
Amplitude Range: 10mVpp to 10Vpp in 50Ω, 20mVpp to 20 20Vpp in Hi-Z.
Amplitude Accuracy (at 1KHz): ±1% of setting ±1mVpp.
DC Offset Range (Peak AC + DC): ±2% of offset setting, ±0.5% of amplitude setting.



 



Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Crest Factor
Crest factor or peak-to-average ratio (PAR) is a measurement of a waveform, calculated from the peak amplitude of the waveform divided by the RMS value of the waveform

Linearity
Linearity is the relative difference between the displayed power ratio, Dx/D0, and the actual (true) power ratio Px/P0 caused by changing the displayed power level from the reference level, D0, to an arbitrary displayed level, Dx.

Phase Noise
Phase noise is the frequency domain representation of rapid, short-term, random fluctuations in the phase of a waveform, caused by time domain instabilities. Phase noise (L(f)) is typically expressed in units of dBc/Hz, representing the noise power relative to the carrier contained in a 1 Hz bandwidth centered at a certain offsets from the carrier.

Sensitivity
Sensitivity is the minimum magnitude of input signal required to produce a specified output signal having a specified signal-to-noise ratio, or other specified criteria.


Please contact us for your new BERKELEY NUCLEONICS CORPORATION 645 sale price and/or BERKELEY NUCLEONICS CORPORATION 645 CALIBRATION

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: