SALUKI S3602B CALIBRATION and SALUKI S3602B REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the SALUKI S3602B Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Network Analyzer, SNA, VNA?
Shop for Comparable Products on our
 used Network Analyzer, SNA, VNA page or new Network Analyzer, SNA, VNA page

 
   SALUKI S3602B   Description / Specification:    
SALUKI S3602B 26.5 GHz Vector Network Analyzer

The Saluki Technology S3602B Vector Network Analyzer provides many calibration methods including frequency response, single interface, responsive isolation, enhanced response, dual interface and electrical calibration, and has set within itself many display formats including logarithmic amplitude, linear range, standing wave, phase, group delay, smith circle map, polar coordinates, and is equipped with many standard interfaces including USB, LAN, GPIB, VGA.
The S3602B can be universally implemented in fields including transmission/reception module measurement, dielectric material property measurement, microwave pulse characteristic measurement and photoelectric property measurement; this analyzer is a necessary tester in the scientific research, production process of systems like radar, communication and navigation. Display; 12.1 inch high resolution touch screen.
Specifications.

Frequency.
Range: 10 MHz - 26.5 GHz.
Resolution: 1 Hz.
Accuracy: ±1×10-7 (23℃±3℃).

Port Harmonic Suppression.
Port 1, 3: -51 dBc (0.01 - 4 GHz), -60 dBc (4 - 26.5 GHz).
Port 2, 4: -13 dBc (0.01 - 4 GHz), -21 dBc (4 - 26.5 GHz).
Port non-harmonic suppression: -40 dBc (0.01 - 16 GHz), -30 dBc (16 - 26.5 GHz).

Port Power Characteristics.
Power Sweep Range: 30 dB (10 - 500 MHz), 32 dB (0.5 - 4GHz), 38 dB (4 - 10 GHz), 37 dB (10 - 13.5 GHz), 35 dB (13.5 - 20 GHz), 23 dB (20 - 26.5 GHz).
Output Power Max: +13 dBm, Port 2, 4, 10 MHz - 4 GHz.
1 dB Compression Level: +10 dBm (0.01 - 16 GHz), +2 dBm (16 - 26.5 GHz).
Power Linearity (23℃ ±3℃): ±2.0 dB.

Pulse Characteristics.
Width Setting Range: 33 ns - 60 s.
Transition time: 30 ns (10% - 90%).



 



Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Averaging
Averaging is a mathematical process to reduce the variation in a measurement by summing the data points from multiple measurements and dividing by the number of points summed.

Jitter
Jitter in technical terms is the deviation in or displacement of some aspect of the pulses in a high-frequency digital signal. Jitter is the time variation of a periodic signal in electronics and telecommunications, often in relation to a reference clock source. Jitter may be observed in characteristics such as the frequency of successive pulses, the signal amplitude, or phase of periodic signals. Jitter is a significant, and usually undesired, factor in the design of almost all communications links (e.g., USB, PCI-e, SATA, OC-48). In clock recovery applications it is called timing jitter.

Pulse Power
Pulse Power, the energy transfer rate is averaged over the pulse width. Pulse width is considered to be the time between the 50 percent risetime/falltime amplitude points. Pulse power averages out any aberrations in the pulse envelope such as overshoot or ringing.


Please contact us for your SALUKI S3602B CALIBRATION and/or SALUKI S3602B 26.5 GHz Vector Network Analyzer REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: