A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the CCI PIMPRO 1921RM Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Cellular Test Set?
Shop for Comparable Products on our
 used Cellular Test Set page or new Cellular Test Set page

   CCI PIMPRO 1921RM (PIMPRO-1921RM)   Description / Specification:   Spec Sheet 
CCI PIMPRO 1921RM PCS 1900, AWS 2100 PIM Analyzer

The CCI PiMPro 1921Rm is a Rack Mount precision Passive Intermod (PIM) analyzer that has been designed to meet the specific challenges of PIM testing both in laboratory and production environments. It covers both the 1850-1990 MHz and 1710-2155 MHz bands. The analyzer delivers maximum power of two carriers at 40 watts (40W x 2) and accuracy of intermodulation (IM) measurements, with a sensitivity of -125 dBm( -168 dBc at 20 watts). In a convenient 19 inch rack mount configuration. The PiMPro provides precise measurement of the 3rd, 5th, 7th and 9th order of intermodulation of any system or component under high-power conditions. In addition to passive intermodulation measurements, the unit will provide VSWR and Return Loss values.

Band: PCS 1900 / AWS 2100.
Receive Frequency: 1850 - 1910 MHz / 1710 - 1755 MHz.
Transmit Frequency: 1930 - 1990 MHz / 2110 - 2155 MHz.
RF Output Connector: 7-16 DIN Female.

Frequency Accuracy: < 5 ppm.
Power Accuracy: 0.3 dB.
Frequency Step Size: 200 kHz.
Power Resolution: 0.1 dB.
Adjustable Power Range: 17 to 46 dBm × 2 (50 mW to 40 W × 2).

Residual Intermod Level: -122 dBm (-125 dBm Typical).
Measurement Sensitivity: -135 dBm.
Noise Floor: -136 dBm.
Reverse Power Protection: 13 dBm (20 mW) continuous.

Measurement Mode;
Measurement Method: One Port, Reverse PIM.
Real Time PIM: 3rd, 5th, 7th & 9th PIM.
Return Loss: Measured in dB.
PIM vs Time: 3rd, 5th, 7th & 9th PIM.
RX Interference: Receive Only Mode - Noise Floor Measurements.
Frequency Sweep: Frequency Response.
DAS Feature: Path Loss Characteristics.


Standard Calibration $750.00 *
*This is a Web introductory price for one calibration of the CCI PIMPRO 1921RM. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.

Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bandwidth is the difference between the upper and lower frequencies in a contiguous set of frequencies within which a fiber optic component, link or network will operate.

Multimode Fiber
Multimode Fiber has a large core (almost always 62.5 microns - a micron is one one millionth of a meter - but sometimes 50 microns) and is used with LED sources at wavelengths of 850 and 1300 nm for short distance, lower speed networks like LANs. Both multimode and singlemode fiber have an outside diameter of 125 microns - about 5 thousandths of an inch - just slightly larger than a human hair.

Synchronous Digital Hierarchy (SDH) is an international digital telecommunications network hierarchy which standardises transmission around the bit rate of 51.84 megabits per second, which is also called STS-1. Multiples of this bit rate comprise higher bit rate streams. Thus STS-3 is 3 times STS-1, STS-12 is 12 times STS-1, and so on. STS-3 is the lowest bit rate expected to carry ATM traffic, and is also referred to as STM-1 (Synchronous Transport Module-Level 1). The SDH specifies how payload data is framed and transported synchronously across optical fibre transmission links without requiring all the links and nodes to have the same synchronized clock for data transmission and recovery.

Please contact us for your CCI PIMPRO 1921RM CALIBRATION and/or CCI PIMPRO 1921RM PCS 1900, AWS 2100 PIM Analyzer REPAIR

I'm interested in: 
Calibration Type (Select one):

Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:

What is the description of the problem?

How/when did the problem start?

 (*) Required Fields    For formal quote please fill in all fields.
From (Email):*
Contact Name:*
Address 1:
Address 2:
State/Territory/Province: *
Zip/Postal Code: