BOONTON PIM 31-F04 CALIBRATION and BOONTON PIM 31-F04 REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the BOONTON PIM 31-F04 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Cellular Test Set?
Shop for Comparable Products on our
 used Cellular Test Set page or new Cellular Test Set page

 
   BOONTON PIM 31-F04   Description / Specification:    
BOONTON PIM 31-F04 TX 1930-1990, RX 1850-1910 MHz Pim Analyzer

The Boonton PIM31-F04 test system is a precision analyzer for passive intermodulation generated in RF paths, components and assemblies. It emulates a base station radio by providing two signals, up to 20W each, thus following the IEC62037 standard for PIM testing. The frequencies of these carriers are variable within the band of the analyzer, allowing PIM 31 operators to select the optimal frequencies for their wireless systems.

Specifications.
TX Band: 1930-1990 MHz.
RX Band: 1850-1910 MHz.
PIM test: Single port reflection.

Carrier Power.
Carrier Power Adjustable Level: +20 to +44 dBm.
Carrier Power Resolution/Accuracy: 0.25 dB / ±0.35 dB.
Frequency Increment: 200 kHz.
Frequency Accuracy (typical): 2 ppm.
Frequency Tuning Lock Time (typical): 1 MS.
Reverse Power Protection (Include ON/OFF Function): 43 dBm / 5 sec Receiver.

Receiver Specifications.
Reverse IM: -132 dBm / -175 dBc.
Average Noise Floor: -138 dBm (1.2 k filter).
Dynamic Range (typical): 96 dB (reference -90 dBm).
Effective IF Bandwidth: 300 Hz, 600 Hz 1.2k, 2.4k, 5k, 10k, 12k, 15k, 25k, 50 kHz.
Operational Input Power: -45 dBm RMS.
Input Power without damage: -10 dBm max.
PIM Measurement Accuracy: ±2 dB for 2 x 43 dBm.

System.
RF Connector: DIN 7/16
User Interface Display: 7” TFT with touch screen display.



 

Standard Calibration $750.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the BOONTON PIM 31-F04. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Decibel (dB)
A unit of measurement of optical power which indicates relative power. A -10 dB means a reduction in power by 10 times, -20 dB means another 10 times or 100 times overall, -30 means another 10 times or 1000 times overall and so on.

PDH
Plesiochronous Digital Hierarchy (PDH) is a transmission system for voice communication using plesiochronous synchronisation. The transmitter adds dummy information bits to allow multiple channels to be bit interleaved. The receiver discards these bits once the signals have been demultiplexed. PDH combines multiple 2 Mb/s (E1) channels in Europe and 1.544 Mb/s (DS1) channels in the US and Japan.

Spectral Width
Spectral Width is the wavelength interval over which the magnitude of all spectral components is equal to or greater than a specified fraction of the magnitude of the component having the maximum value. In optical communications applications, the usual method of specifying spectral width is the full width at half maximum. This is the same convention used in bandwidth, defined as the frequency range where power drops by less than half (at most -3 dB).


Please contact us for your BOONTON PIM 31-F04 CALIBRATION and/or BOONTON PIM 31-F04 TX 1930-1990, RX 1850-1910 MHz Pim Analyzer REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: