BOONTON PIM 31-F02 CALIBRATION and BOONTON PIM 31-F02 REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the BOONTON PIM 31-F02 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Cellular Test Set?
Shop for Comparable Products on our
 used Cellular Test Set page or new Cellular Test Set page

 
   BOONTON PIM 31-F02   Description / Specification:    
BOONTON PIM 31-F02 TX 925-960, RX 880-915 MHz Pim Analyzer

The Boonton PIM31-F02 test system is a precision analyzer for passive intermodulation generated in RF paths, components and assemblies. It emulates a base station radio by providing two signals, up to 20W each, thus following the IEC62037 standard for PIM testing. The frequencies of these carriers are variable within the band of the analyzer, allowing PIM 31 operators to select the optimal frequencies for their wireless systems.

Specifications.
TX Band: 925-960 MHz.
RX Band: 880-915 MHz.
PIM test: Single port reflection.

Carrier Power.
Carrier Power Adjustable Level: +20 to +44 dBm.
Carrier Power Resolution/Accuracy: 0.25 dB / ±0.35 dB.
Frequency Increment: 200 kHz.
Frequency Accuracy (typical): 2 ppm.
Frequency Tuning Lock Time (typical): 1 MS.
Reverse Power Protection (Include ON/OFF Function): 43 dBm / 5 sec Receiver.

Receiver Specifications.
Reverse IM: -132 dBm / -175 dBc.
Average Noise Floor: -138 dBm (1.2 k filter).
Dynamic Range (typical): 96 dB (reference -90 dBm).
Effective IF Bandwidth: 300 Hz, 600 Hz 1.2k, 2.4k, 5k, 10k, 12k, 15k, 25k, 50 kHz.
Operational Input Power: -45 dBm RMS.
Input Power without damage: -10 dBm max.
PIM Measurement Accuracy: ±2 dB for 2 x 43 dBm.

System.
RF Connector: DIN 7/16
User Interface Display: 7” TFT with touch screen display.



 

Standard Calibration $750.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the BOONTON PIM 31-F02. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Chirp
A change in the optical frequency caused by direct modulation of the laser. A chirp is a signal in which the frequency increases ('up-chirp') or decreases ('down-chirp') with time. In some sources, the term chirp is used interchangeably with sweep signal.

Nanometer (nm)
A unit of measure used to measure wavelength of light, meaning one one-billionth of a meter

Singlemode Fiber
Singlemode Fiber has a small core, only about 9 microns, and is used for telephony and CATV with laser sources at 1300 and 1550 nm. It can go very long distances at very high speeds. Both multimode and singlemode fiber have an outside diameter of 125 microns - about 5 thousandths of an inch - just slightly larger than a human hair.


Please contact us for your BOONTON PIM 31-F02 CALIBRATION and/or BOONTON PIM 31-F02 TX 925-960, RX 880-915 MHz Pim Analyzer REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: