BOONTON PIM 31-F03 CALIBRATION and BOONTON PIM 31-F03 REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the BOONTON PIM 31-F03 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Cellular Test Set?
Shop for Comparable Products on our
 used Cellular Test Set page or new Cellular Test Set page

 
   BOONTON PIM 31-F03   Description / Specification:    
BOONTON PIM 31-F03 TX 1805-1880, RX 1710-1785 MHz Pim Analyzer

The Boonton PIM31-F03 test system is a precision analyzer for passive intermodulation generated in RF paths, components and assemblies. It emulates a base station radio by providing two signals, up to 20W each, thus following the IEC62037 standard for PIM testing. The frequencies of these carriers are variable within the band of the analyzer, allowing PIM 31 operators to select the optimal frequencies for their wireless systems.

Specifications.
TX Band: 1805-1880 MHz.
RX Band: 1710-1785 MHz.
PIM test: Single port reflection.

Carrier Power.
Carrier Power Adjustable Level: +20 to +44 dBm.
Carrier Power Resolution/Accuracy: 0.25 dB / ±0.35 dB.
Frequency Increment: 200 kHz.
Frequency Accuracy (typical): 2 ppm.
Frequency Tuning Lock Time (typical): 1 MS.
Reverse Power Protection (Include ON/OFF Function): 43 dBm / 5 sec Receiver.

Receiver Specifications.
Reverse IM: -132 dBm / -175 dBc.
Average Noise Floor: -138 dBm (1.2 k filter).
Dynamic Range (typical): 96 dB (reference -90 dBm).
Effective IF Bandwidth: 300 Hz, 600 Hz 1.2k, 2.4k, 5k, 10k, 12k, 15k, 25k, 50 kHz.
Operational Input Power: -45 dBm RMS.
Input Power without damage: -10 dBm max.
PIM Measurement Accuracy: ±2 dB for 2 x 43 dBm.

System.
RF Connector: DIN 7/16
User Interface Display: 7” TFT with touch screen display.



 

Standard Calibration $750.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the BOONTON PIM 31-F03. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Data Rate
Data Rate is the maximum number of bits of information which can be transmitted per second, as in a data transmission link. Typically expressed as megabits per second (Mbps).

Optical Signal-to-noise Ratio (OSNR)
Optical Signal-to-noise ratio is the ratio between the signal power and the noise power in a given bandwidth. Most commonly a reference bandwidth of 0.1 nm is used. This bandwidth is independent from the modulation format, the frequency and the receiver. For instance a OSNR of 20dB/0.1nm could be given, even the signal of 40 GBit DPSK would not fit in this bandwidth. OSNR is measured with a Optical Spectrum Analyzer. It is generally measured at the wavelength of interest.

SONET
Synchronous Optical NETwork (SONET) is a fiber-optic transmission system for high-speed digital traffic. Employed by telephone companies and common carriers, speeds range from 51 Mbps to 40 Gbps. SONET is an intelligent system that provides advanced network management and a standard optical interface. Specified in the Broadband ISDN (B-ISDN) standard, SONET backbones are widely used to aggregate T1 and T3 lines. The European counterpart to SONET is the Synchronous Digital Hierarchy, and the term "SONET/SDH" is widely used when referring to SONET


Please contact us for your BOONTON PIM 31-F03 CALIBRATION and/or BOONTON PIM 31-F03 TX 1805-1880, RX 1710-1785 MHz Pim Analyzer REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: