BOONTON PIM 21 CALIBRATION and BOONTON PIM 21 REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the BOONTON PIM 21 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Cellular Test Set?
Shop for Comparable Products on our
 used Cellular Test Set page or new Cellular Test Set page

 
   BOONTON PIM 21   Description / Specification:    
BOONTON PIM 21 PIM Analyzer

The Boonton PIM 21 is a microprocessor controlled, portable test set allowing detection of distortion components and assemblies in radio base station, in-building DAS installations and other systems transmitting radio frequencies. The PIM 21 is not intended to be a laboratory instrument or replace such instruments. It has been specifically designed for field portability and fault location.

Specifications.
Test frequencies: 2 custom frequencies (Manufactured to customer specific frequencies).
PIM test: Single port reflection.
Measurement connector: 7/16 mm DIN Female.

Carrier Power.
Carrier Power Adjustable Level: +20 to +33 dBm, in 1dB steps.
PCS: +20 to +30 dBm, in 1dB steps.
Power accuracy: ±1 dB/carrier.
Frequency accuracy: 2 ppm (typical).
Reverse power protection: 37 dBm/5 sec.

PIM Measurements.
Range: -80 to -153 dBc @ 850 MHz (-155 dBc typical).
PIM Measurement Accuracy: 1 dB to -153 dBc @850 MHz, ±3 dB to -155 dBc @ 850 MHz.
RF Calibration: Automatic with RF Power On.



 

Standard Calibration $750.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the BOONTON PIM 21. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bandwidth
Bandwidth is the difference between the upper and lower frequencies in a contiguous set of frequencies within which a fiber optic component, link or network will operate.

Multimode Fiber
Multimode Fiber has a large core (almost always 62.5 microns - a micron is one one millionth of a meter - but sometimes 50 microns) and is used with LED sources at wavelengths of 850 and 1300 nm for short distance, lower speed networks like LANs. Both multimode and singlemode fiber have an outside diameter of 125 microns - about 5 thousandths of an inch - just slightly larger than a human hair.

SDH
Synchronous Digital Hierarchy (SDH) is an international digital telecommunications network hierarchy which standardises transmission around the bit rate of 51.84 megabits per second, which is also called STS-1. Multiples of this bit rate comprise higher bit rate streams. Thus STS-3 is 3 times STS-1, STS-12 is 12 times STS-1, and so on. STS-3 is the lowest bit rate expected to carry ATM traffic, and is also referred to as STM-1 (Synchronous Transport Module-Level 1). The SDH specifies how payload data is framed and transported synchronously across optical fibre transmission links without requiring all the links and nodes to have the same synchronized clock for data transmission and recovery.


Please contact us for your BOONTON PIM 21 CALIBRATION and/or BOONTON PIM 21 PIM Analyzer REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: