AWT GLOBAL PS1L2400LTE CALIBRATION and AWT GLOBAL PS1L2400LTE REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the AWT GLOBAL PS1L2400LTE Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Cellular Test Set?
Shop for Comparable Products on our
 used Cellular Test Set page or new Cellular Test Set page

 
   AWT GLOBAL PS1L2400LTE   Description / Specification:    
AWT GLOBAL PS1L2400LTE LTE2400, Band 40 PIM Analyzer

The AWT-Global PS1L2400LTE LTE2400, Band 40 PIM analyzer is ideal for component testing in the laboratory and/or during quality control. It offers variable output power from 15 dBm to 44 dBm per channel. Test Modes Include: Diagnostic, Analyzer with Multi-PIM, PIM-over-Time, Sweep Mode, Single Carrier Mode for System Return Loss measurements, Distance to PIM, VSWR, Distance-to-Fault.
Specifications.

System
.
Measurement Method: Reverse (reflected) PIM, 3rd, 5th, 7th, 11th up to 25th order.
Reverse IM: < -129 dBm / -172 dBc.

Transmitter.
Frequencies: 2300 ~ 2345 MHz.
Frequency increments: 100 kHz.
Frequency accuracy: 2 ppm.
Power (per tone): 15 - 44 dBm adjustable (46 dBm opt).
Power Accuracy: +/- 0.35 dB.
Reverse Power Protection: +43 dBm for 5 sec.

Receiver.
Frequencies: 2355 ~ 2400 MHz.
Measurement Range: -45 dBm to - 132 dBm, -88 dBc to -175 dBc.
Noise Floor: (BW: 300 / 1200 Hz) <-138 / -132 dBm (typical).
Dynamic Range (typical): 96 dB (ref: -70 dBm).
Max Input Power: 0 dBm.
Measurement Accuracy +/- 1.0 dB (typical).

Options.
POPT1: Embedded option for Distance-to-PIM (DTP), Return Loss, VSWR and distance-to-fault.
POPT5: Increases output power, adjustable range from 20 dBm to 46 dBm.
PIMGEN: PIM generator, preset PIM value -80 dBm (+/-10) for quick system tests.



 

Standard Calibration $625.00 *
*This is a Web introductory price for one calibration of the AWT GLOBAL PS1L2400LTE. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Decibel (dB)
A unit of measurement of optical power which indicates relative power. A -10 dB means a reduction in power by 10 times, -20 dB means another 10 times or 100 times overall, -30 means another 10 times or 1000 times overall and so on.

PDH
Plesiochronous Digital Hierarchy (PDH) is a transmission system for voice communication using plesiochronous synchronisation. The transmitter adds dummy information bits to allow multiple channels to be bit interleaved. The receiver discards these bits once the signals have been demultiplexed. PDH combines multiple 2 Mb/s (E1) channels in Europe and 1.544 Mb/s (DS1) channels in the US and Japan.

Spectral Width
Spectral Width is the wavelength interval over which the magnitude of all spectral components is equal to or greater than a specified fraction of the magnitude of the component having the maximum value. In optical communications applications, the usual method of specifying spectral width is the full width at half maximum. This is the same convention used in bandwidth, defined as the frequency range where power drops by less than half (at most -3 dB).


Please contact us for your AWT GLOBAL PS1L2400LTE CALIBRATION and/or AWT GLOBAL PS1L2400LTE LTE2400, Band 40 PIM Analyzer REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: