NEW CUSTOM-CAL GTS-42DB SALES and CUSTOM-CAL GTS-42DB CALIBRATION

 
Custom-Cal has for sale a new CUSTOM-CAL GTS-42DB. Also, short calibration turn times minimize downtime and reasonable rates decrease your long-term cost of ownership and minimizes downtime of the CUSTOM-CAL GTS-42DB. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Calibration / Verification Kits? Shop for Comparable Products on our   new Calibration / Verification Kits page

 
List Price for a new CUSTOM-CAL GTS-42DB, $425.00   CUSTOM-CAL GTS-42DB   Description / Specification:    
CUSTOM-CAL GTS-42DB Precision 42 dB Calibration Kit

The GTS-42DB provides high performance 42 dB return loss performance for the most accurate single ended measurements. The return loss below 6 GHz is exceptionally good. This OSL is popular with Sitemaster, Field-fox, SiteHawk and other antenna and cable analyzers. This is usable above 11 GHz for network analyzer use. Designed and made in the USA. The load can easily be replaced. Replaceable Load Technology allows simple replacement of the 50Ω load, which lowers the cost of maintaining your cal kits.

Electrical Specifications:
Impedance: 50 Ohms.
Frequency: 11GHz (usable to 18 GHz).
Effective Length: 26.5mm (88.3ps) (O/S).
Return Loss;
  Dc - 4 GHz: 42 dB minimum,
  6 GHz: 36 dB typical,
  8-18 GHz: 24 dB typical.



 



Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Averaging
Averaging is a mathematical process to reduce the variation in a measurement by summing the data points from multiple measurements and dividing by the number of points summed.

Jitter
Jitter in technical terms is the deviation in or displacement of some aspect of the pulses in a high-frequency digital signal. Jitter is the time variation of a periodic signal in electronics and telecommunications, often in relation to a reference clock source. Jitter may be observed in characteristics such as the frequency of successive pulses, the signal amplitude, or phase of periodic signals. Jitter is a significant, and usually undesired, factor in the design of almost all communications links (e.g., USB, PCI-e, SATA, OC-48). In clock recovery applications it is called timing jitter.

Pulse Power
Pulse Power, the energy transfer rate is averaged over the pulse width. Pulse width is considered to be the time between the 50 percent risetime/falltime amplitude points. Pulse power averages out any aberrations in the pulse envelope such as overshoot or ringing.


Please contact us for your new CUSTOM-CAL GTS-42DB sale price and/or CUSTOM-CAL GTS-42DB CALIBRATION

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: