SCS STATIC CONTROL 725 CALIBRATION and SCS STATIC CONTROL 725 REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the SCS STATIC CONTROL 725 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

 

 
   SCS STATIC CONTROL 725   Description / Specification:    
SCS STATIC CONTROL 725 Wrist Strap Monitor

The SCS 725 Wrist Strap Monitor is designed to monitor the operation of a wrist strap grounding system for a single operator. This product has been designed and tested for use with SCS Dual Conductor Wrist Straps and SCS Worksurfaces Grounding Systems. It is powered by a 9 volt alkaline battery and meets requirements of ANSI/ESD S20.20 and recommendations of ESD Handbook ESD TR20.20.
Specifications.

Accuracy: ±15%.
Test Voltage: 9VDC open circuit.
Test Current: Less than 1 microamp.
Size: 2.5" x 2.6" x 1.1".
Power Supply Requirements: 9 Volt alkaline battery.
Operating Temperature: 110°F / 43°C (Maximum) to 50°F / 10°C (Minimum).
Operating Humidity: Maximum relative humidity 75%.



 



Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Channel Bandwidth
Channel Bandwidth is the bandwidth over which power is measured. This is usually the bandwidth in which almost all of the power of a signal is contained.

Jitter
Jitter in technical terms is the deviation in or displacement of some aspect of the pulses in a high-frequency digital signal. Jitter is the time variation of a periodic signal in electronics and telecommunications, often in relation to a reference clock source. Jitter may be observed in characteristics such as the frequency of successive pulses, the signal amplitude, or phase of periodic signals. Jitter is a significant, and usually undesired, factor in the design of almost all communications links (e.g., USB, PCI-e, SATA, OC-48). In clock recovery applications it is called timing jitter.

Overshoot
Overshoot is the distortion that follows a major transition; the difference between the peak power point and the pulse-top amplitude computed as a percentage of the pulse-top amplitude.

Rise Time
Rise time refers to the time required for a signal to change from a specified low value to a specified high value, usually 10 and 90 percent of pulse-top amplitude (vertical display is linear power).


Please contact us for your SCS STATIC CONTROL 725 CALIBRATION and/or SCS STATIC CONTROL 725 Wrist Strap Monitor REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: