A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the KEYSIGHT U2722A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another General Meter?
Shop for Comparable Products on our
 used General Meter page

   KEYSIGHT U2722A   Description / Specification:    
KEYSIGHT U2722A 20V/120mA USB Modular Source Measure Unit

The Keysight U2722A USB Modular Source Measure Unit is a 3-channel 20V/120mA that can operate in a 4-quadrant operation. The channels could be connected in series or in parallel to achieve up to 60 V/360 mA. It uses the common non-proprietary standard high-speed USB 2.0 interface that provides ease of connectivity - allowing users to set up and configure their tests swiftly with its plug and play feature. The U2722A can function as a standalone module. It can also be used as a modular device, allowing expansion and compact solution when used with the other modules in the USB Modular Instruments and DAQ family.

Number of outputs: 3.
Voltage Output: -20 V to 20 V.
Current Output: -120 mA to 120 mA.
Voltage programming Ranges: ±2 V, ±20 V.
Voltage programming Max Resolution: 0.1 mV.
Current programming Ranges: ±1 µA, ±10 µA, ±100 µA, ±1 mA, ±10 mA, ±120 mA.
Current programming Max Resolution: 100 pA.
Voltage readback Ranges: ±2 V, ±20 V.
Voltage readback Max Resolution: 0.1 mV.
Current readback Ranges: ±1 µA, ±10 µA, ±100 µA, ±1 mA, ±10 mA, ±120 mA.
Current readback Max Resolution: 100 pA.
Remote sense operating range: Ensure that the maximum voltage between the OUTPUT+ and SENSE+, OUTPUT-, and SENSE- does not exceed 3 V.
Temperature coefficient: Maximum change in output/readback per °C after a 30-minute warm-up is 0.15. Guard output resistance: 0.2 kohm.
Noise 10 Hz to 20 MHz (peak-peak): 100 mV typical into a resistive load (floating mode).
Output voltage overshoot, ±(% of output + offset): During turn-on or turn-off, the output plus overshoot < 0.1% + 10 mV.
Programming language: SCPI (Standard Commands for Programmable Instruments).
Maximum sense lead resistance: 1 M-ohm for rated accuracy.


Standard Calibration $185.00 *
*This is a Web introductory price for one calibration of the KEYSIGHT U2722A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.

Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Averaging is a mathematical process to reduce the variation in a measurement by summing the data points from multiple measurements and dividing by the number of points summed.

Fall Time
Fall time is the time required for the amplitude of a pulse to decrease (fall) from a specified value (usually 90 percent of the peak value exclusive of overshoot or undershoot) to another specified value (usually 10 percent of the maximum value exclusive of overshoot or undershoot).

Noise Density
Noise Density is the amount of noise within a defined bandwidth, usually normalized to 1 Hz.

Resolution Bandwidth (RBW)
Resolution Bandwidth (RBW) is the minimum bandwidth over which you can separate two signals and still see them.

Please contact us for your KEYSIGHT U2722A CALIBRATION and/or KEYSIGHT U2722A 20V/120mA USB Modular Source Measure Unit REPAIR

I'm interested in: 
Calibration Type (Select one):

Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:

What is the description of the problem?

How/when did the problem start?

 (*) Required Fields    For formal quote please fill in all fields.
From (Email):*
Contact Name:*
Address 1:
Address 2:
State/Territory/Province: *
Zip/Postal Code: