KEYSIGHT U8001A CALIBRATION and KEYSIGHT U8001A REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the KEYSIGHT U8001A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another DC Power Supply?
Shop for Comparable Products on our  used DC Power Supply page

 
   KEYSIGHT U8001A   Description / Specification:    
KEYSIGHT U8001A 30V 3A Single Output DC Power Supply

The Keysight U8001A is a Single Output, Non-programmable DC Power Supply extends the functionality of non-programmable power supplies with features typically found only in programmable models. It is suitable for a variety of electronics manufacturing applications.
Specifications.

Output Ratings (at 0 °C to 40 °C): 0 to +30 V, 0 to 3 A.
Line and Load Regulation: CV <0.01% +2 mV, CC <0.02% +2 mA.
Ripple and Noise (25 °C ±5 °C): CV 12 mVp-p, <1 mVrms; CC 3 mArms
Load Transient Response Time (within 15 mV from full load to half load and from half load to full load): <50 μs.
Programming Accuracy (25 °C ±5 °C, based on 1-hour warm-up period): <0.35% +20 mV, <0.35% +20 mA.
Readback Accuracy (25 °C ±5 ° C, based on 1-hour warm-up period): <0.35% +20 mV, <0.35% +20 mA.
Meter Resolution: Voltage 10 mV, Current 10 mA.
Temperature Coefficient (for 12 months): CV <100 ppm/ °C, CC <380 ppm/ °C.
Output Voltage Overshoot: <1 V.
Over Voltage Protection Response Time: <1.5 ms when the trip voltage is equal or greater than 3 V and <10 ms when the trip voltage is less than 3 V (average time for output to drop from 90% of output voltage to 1 V after OVP condition occured).
Over Voltage Protection Accuracy ± (% of output + offset): <0.5% +0.5 V.
Over Voltage Protection Programmable Range: 1 V to 33 V.
Over Current Protection Accuracy ± (% of output + offset): <0.5% +0.5 A.
Over Current Protection Programmable Range: 1 A to 3.3 A.



 

Standard Calibration $95.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the KEYSIGHT U8001A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBm
dBm (sometimes dBmW) is an abbreviation for the power ratio in decibels (dB) of the measured power referenced to one milliwatt (mW). Zero dBm equals one milliwatt. A 3 dB increase represents roughly doubling the power, a 3 dB decrease, the power is reduced by about one half.

Millimeter-wave
Millimeter-wave is a term that generally refers to frequencies of 26.5 GHz and above. That is where signal wavelengths fall below approximately 10 mm, and thus the terminology changes from centimeters to millimeters.

Power Repeatability
Power Repeatability is the random uncertainty in reproducing the power level after changing and re-setting the power level. The power repeatability is ± half the span (in dB) between the highest and lowest actual power. Note: - The long-term power repeatability can be obtained by taken the power repeatability and power stability into account.

Stability
Stability is the extent to which a specified property, characteristic, or parameter of a substance, device, or apparatus, remains fixed with the passage of time or with varying environmental conditions.

Please contact us for your KEYSIGHT U8001A CALIBRATION and/or KEYSIGHT U8001A 30V 3A Single Output DC Power Supply REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: