KEYSIGHT U8002A CALIBRATION and KEYSIGHT U8002A REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the KEYSIGHT U8002A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another DC Power Supply?
Shop for Comparable Products on our  used DC Power Supply page

 
   KEYSIGHT U8002A   Description / Specification:    
KEYSIGHT U8002A 30V 5A Single Output DC Power Supply

The Keysight U8002A is a Single Output, Non-programmable DC Power Supply extends the functionality of non-programmable power supplies with features typically found only in programmable models. It is suitable for a variety of electronics manufacturing applications.
Specifications.

Output Ratings (at 0 °C to 40 °C): 0 to +30 V, 0 to 5 A.
Line and Load Regulation: CV <0.01% +2 mV, CC <0.02% +2 mA.
Ripple and Noise (25 °C ±5 °C): CV 12 mVp-p, <1 mVrms; CC 3 mArms
Load Transient Response Time (within 15 mV from full load to half load and from half load to full load): <50 μs.
Programming Accuracy (25 °C ±5 °C, based on 1-hour warm-up period): <0.35% +20 mV, <0.35% +20 mA.
Readback Accuracy (25 °C ±5 ° C, based on 1-hour warm-up period): <0.35% +20 mV, <0.35% +20 mA.
Meter Resolution: Voltage 10 mV, Current 10 mA.
Temperature Coefficient (for 12 months): CV <100 ppm/ °C, CC <300 ppm/ °C.
Output Voltage Overshoot: <1 V.
Over Voltage Protection Response Time: <1.5 ms when the trip voltage is equal or greater than 3 V and <10 ms when the trip voltage is less than 3 V (average time for output to drop from 90% of output voltage to 1 V after OVP condition occured).
Over Voltage Protection Accuracy ± (% of output + offset): <0.5% +0.5 V.
Over Voltage Protection Programmable Range: 1 V to 33 V.
Over Current Protection Accuracy ± (% of output + offset): <0.5% +0.5 A.
Over Current Protection Programmable Range: 1 A to 5.5 A.



 

Standard Calibration $95.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the KEYSIGHT U8002A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Available Gain
Available Gain is the ratio, at a specific frequency, of power available from the output to the power in from the source.

Decibel (dB)
A unit of measurement of power which indicates relative power. A -10 dB means a reduction in power by 10 times, -20 dB means another 10 times or 100 times overall, -30 means another 10 times or 1000 times overall and so on.

Mismatch Uncertainty
Mismatch Uncertainty is caused by re-reflections between one device (the source) and the device that follows it (the load).

Pulse Power
Pulse Power, the energy transfer rate is averaged over the pulse width. Pulse width is considered to be the time between the 50 percent risetime/falltime amplitude points. Pulse power averages out any aberrations in the pulse envelope such as overshoot or ringing.

Please contact us for your KEYSIGHT U8002A CALIBRATION and/or KEYSIGHT U8002A 30V 5A Single Output DC Power Supply REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: