ILX LIGHTWAVE LDT-5545B CALIBRATION and ILX LIGHTWAVE LDT-5545B REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ILX LIGHTWAVE LDT-5545B Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another TEC Temperature Controller?
Shop for Comparable Products on our
 used TEC Temperature Controller page

 
   ILX LIGHTWAVE LDT-5545B   Description / Specification:    
ILX LIGHTWAVE LDT-5545B 50W Thermoelectric Temperature Controller

The ILX Lightwave LDT-5545B is a precision; microprocessor based thermoelectric (TE) temperature controllers that deliver a low noise, bipolar constant current output of up to 5 Amps and 50W of heating or cooling power. These instruments close a precision temperature control loop through a variety of temperature sensors and display temperature from -99° C to 199° C or sensor resistance. The temperature controller topology, paired with a hybrid smart-integrator control loop result in fast settling times with a temperature stability of 0.004 C which is ideal for laser diode or optoelectronic component testing requiring stable wavelength and optical power.
Specifications.

Temperature Control Output.
Temperature Control Range: -99 to 199.9° C.
Temperature Setpoint Resolution: 0.1° C.
Temperature Setpoint Accuracy: ±0.2° C.
Short-Term Stability (1 hr): ±0.006° C.
Long-Term Stability (24 hr): ±0.01° C.

TEC Output.
Type: Bipolar current source.
Control Algorithm Smart Integrator, Hybrid PI.
Compliance Voltage: >10 V DC (@ 5A).
Maximum Output Current: 5.0 A.
Maximum Output Power: 50W.
Current Noise and Ripple: <1 mA rms.

Current Limit.
Current Limit Range: 0 - 5.05 A.
Current Limit Set Accuracy: + 50 mA.



 



Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Amplified Spontaneous Emission Source (ASE)
ASE, a process where spontaneously emitted radiation (luminescence) is amplified. In lasers and particularly in high-gain erbium-doped amplifiers, amplified spontaneous emission is usually an unwanted effect. It tends to limit the gain achievable in a single stage of a fiber optic amplifier to the order of 40–50 dB.

Dynamic Range
In a transmission system, the ratio of the overload level to the noise level of the system, usually expressed in dB. Ratio of the highest to lowest detectable signal of a system, expressed in dB.

Optical Power
Optical Power is usually measured in "dBm", or decibels referenced to one miliwatt of power. while loss is a relative reading, optical power is an absolute measurement, referenced to standards. You measure absolute power to test transmitters or receivers and relative power to test loss.

Relative Wavelength Accuracy
When randomly changing the wavelength and measuring the differences between the actual and displayed wavelengths, the relative wavelength accuracy is ± half the span between the maximum and the minimum value of all differences.

Wavelength
Wavelength is a term for the color of light, usually expressed in nanometers (nm) or microns (m). In Fiber Optics the wavelenghts mostly used are in the infrared region where the light is invisible to the human eye.


Please contact us for your ILX LIGHTWAVE LDT-5545B CALIBRATION and/or ILX LIGHTWAVE LDT-5545B 50W Thermoelectric Temperature Controller REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: