Keysight (Agilent) 86130A REPAIR and Keysight (Agilent) 86130A CALIBRATION

The Keysight (Agilent) 86130A is currently in stock and available for purchase on our  Sales Page
It is also available for immediate rental.
Custom-Cal has a high success rate in the repair of the Keysight (Agilent) 86130A. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 86130A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Bit Error Rate Tester (BERT)?
Shop for Comparable Products on our
 used Bit Error Rate Tester (BERT) page or new Bit Error Rate Tester (BERT) page

 
   Keysight (Agilent) 86130A   Description / Specification:    
Keysight (Agilent) 86130A BitAlyzer Error Performance Analyzer and Pattern Generator

Agilent 86130A BitAlyzer 3 Gbit/s BitAlyzer with basic error analysis (3 Gbit/s BER measurement and analysis with internal clock source, 3.6 Gbit/s external clock). Options: 86130A-100, 2-D error mapping. 86130A-200, Error correction coding analysis. 86130A-300, Add E4422B 4.0 GHz external synthesized signal source. Pattern Generator Parameters; Operating Frequency: 50 MHz to 3.6 GHz with external clock (opt), 50 MHz to 3 GHz with internal clock source. Internal Clock Source; Freq. Range: 50 MHz to 3 GHz. Freq. Accuracy: ±20 ppm. Test Patterns; 2^N-1 PRBS: 2^31-1, 2^23-1, 2^15-1, 2^10-1, 2^7-1. 2^N PRBS: 2^23, 2^15, 2^10, 2^7, Variable Mark Density 1/8, 1/4, 1/2, 3/4, 7/8. User Defined Patterns: Variable length patterns from 1 to 8 Mbits. Alternating Patterns: Change between two equal length user patterns, each up to 4 Mbits long. Changeover is synchronous with the end of a pattern, under control of the front panel or Auxiliary Input. Error Add: Single, continuously variable between 1x10-2 and 1x10-9, and user specified bursts of errors. Pattern Editor included with cut, copy & paste functions. Error Detector Parameters; Operating Frequency: 50 MHz to 3.6 GHz.. Test Patterns: As specified for Pattern Generator. Auto-Align: Includes synchronizing, data polarity, clock/ data align, clock invert, 0/1 threshold center. Data In Delay: Manual Data In Delay/Auto Clock-Data Align. Threshold Setting: Manual set, Average DC level set, Auto 0/1 center. Synchronization: Manual, Auto, Burst, Capture. Sync threshold adjustable from 10^-1 to 10^-9. Internal Hard Disk for local storage of user patterns and data. Removable Storage, MS-DOS® compatible 3.5" Superdrive (accepts 1.4 Mbyte HD disks & 120 Mbyte SuperDisks) Data Entry, Touch-sensitive display, numeric keypad with up/down arrows, analog feel position controls, or provided USB keyboard and mouse if desired. Display, Internal 8" (diag) backlit LCD touch-screen. Interfaces: GPIB (IEEE 488), LAN (10 Base T Ethernet) for print and file transfer, printer port, VGA output.



Looking for a replacement? Try the  POCKETBERT PB10A

Standard Calibration $695.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 86130A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bandwidth
Bandwidth is the difference between the upper and lower frequencies in a contiguous set of frequencies within which a fiber optic component, link or network will operate.

Multimode Fiber
Multimode Fiber has a large core (almost always 62.5 microns - a micron is one one millionth of a meter - but sometimes 50 microns) and is used with LED sources at wavelengths of 850 and 1300 nm for short distance, lower speed networks like LANs. Both multimode and singlemode fiber have an outside diameter of 125 microns - about 5 thousandths of an inch - just slightly larger than a human hair.

SDH
Synchronous Digital Hierarchy (SDH) is an international digital telecommunications network hierarchy which standardises transmission around the bit rate of 51.84 megabits per second, which is also called STS-1. Multiples of this bit rate comprise higher bit rate streams. Thus STS-3 is 3 times STS-1, STS-12 is 12 times STS-1, and so on. STS-3 is the lowest bit rate expected to carry ATM traffic, and is also referred to as STM-1 (Synchronous Transport Module-Level 1). The SDH specifies how payload data is framed and transported synchronously across optical fibre transmission links without requiring all the links and nodes to have the same synchronized clock for data transmission and recovery.


Please contact us for your Keysight (Agilent) 86130A REPAIR and/or Keysight (Agilent) 86130A BitAlyzer Error Performance Analyzer and Pattern Generator CALIBRATION

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: