Keysight (Agilent) 8642B REPAIR and Keysight (Agilent) 8642B CALIBRATION
 
Custom-Cal has a high success rate in the repair of the Keysight (Agilent) 8642B. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 8642B Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Signal Generator?
Shop for Comparable Products on our  used Signal Generator page

 
   Keysight (Agilent) 8642B   Description / Specification:    
Keysight (Agilent) 8642B 2115 MHz Synthesized Signal Generator

The HP 8642B synthesized signal generator is a high performance programmable signal generator intended for the most demanding out-of-channel RF receiver measurements and other stringent RF applications. It provides state-of-the-art SSB phase noise at 20 kHz offsets of -134 dBc/ Hz at 1 GHz. Nonharmonic spurious are held to below -100 dBc on the HP 8642B up to 1 GHz and to below -94 dBc above 1 GHz. This generator allows receiver spurious rejection tests to be fully automated with the utmost confidence in test results. In addition to a high-reliability attenuator, absolute output level accuracy is ±1 dB down to -127 dBm (0.1 uV) . The HP 8642B offers AM, FM, M and pulse modulation across their full frequency ranges. A low distortion internal modulation oscillator can be used to modulate the HP 8642B up to 100 kHz rates. The internal audio oscillator can also be used as a stand-alone audio source with variable rates and levels. Frequency Range: 100 kHz to 2115 MHz. Resolution: 1 Hz, 0.1 Hz with special function. Output Level range: from maximum available to -140 dBm (0.023 uV). Resolution: 0.1 dB. Absolute accuracy: ±1 dB, output level >= -127 dBm. Flatness: <= ±0.75 dB, +10 dBm output level. Opt 001 High stability time base. Opt 002 Input/output connectors on rear panel only.



 

Standard Calibration $650.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 8642B. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Available Gain
Available Gain is the ratio, at a specific frequency, of power available from the output to the power in from the source.

Decibel (dB)
A unit of measurement of power which indicates relative power. A -10 dB means a reduction in power by 10 times, -20 dB means another 10 times or 100 times overall, -30 means another 10 times or 1000 times overall and so on.

Mismatch Uncertainty
Mismatch Uncertainty is caused by re-reflections between one device (the source) and the device that follows it (the load).

Pulse Power
Pulse Power, the energy transfer rate is averaged over the pulse width. Pulse width is considered to be the time between the 50 percent risetime/falltime amplitude points. Pulse power averages out any aberrations in the pulse envelope such as overshoot or ringing.

Please contact us for your Keysight (Agilent) 8642B REPAIR and/or Keysight (Agilent) 8642B 2115 MHz Synthesized Signal Generator CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: