Keysight (Agilent) 8752A REPAIR and Keysight (Agilent) 8752A CALIBRATION

The Keysight (Agilent) 8752A is currently in stock and available for purchase on our  Sales Page
It is also available for immediate rental.
Custom-Cal has a high success rate in the repair of the Keysight (Agilent) 8752A. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 8752A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Network Analyzer, SNA, VNA?
Shop for Comparable Products on our
 used Network Analyzer, SNA, VNA page or new Network Analyzer, SNA, VNA page

   Keysight (Agilent) 8752A   Description / Specification:    
Keysight (Agilent) 8752A RF Network Analyzer

The HP 8752A RF network analyzer provides simple and complete vector network measurements in a compact and fully integrated RF network analyzer. Characterize your RF components and networks accurately and with the HP 8752A RF network analyzer in the 300 kHz to 1.3 or 3 GHz frequency range. Integration of the swept synthesized source, test set, and receiver results in a network analyzer that is easy to set up and use, which is ideal for service, incoming inspection, production, and final test measurements. The integrated synthesized source provides measurement port power level of +5 to -20 dBm with linear, log, list, power, and CW sweep types. The sensitive tuned receivers provide 100 dB of dynamic range. With two independent display channels available, you can simultaneously measure the reflection and transmission characteristics of the device under test on the crisp color display. Data can be displayed in log magnitude, linear magnitude, SWR, phase, group delay, polar, real, or Smith chart formats. The easy-to-use softkey measurement functions allow you to quickly measure the desired characteristic of your device under test. Specifications. Source Frequency Range: 300 kHz to 1.3 GHz, (Opt 003: 300 kHz to 3 GHz). Resolution: 1 Hz. Accuracy: ± 10 ppm. Output Power range: - 20 to + 5 dBm. Resolution: 0.1 dB. Flatness: < 2 dB peak-to-peak. Level accuracy (50 MHz, - 5 dBm): ± 0.5 dB. Impedance: 50 ohm. Receiver Frequency range: 300 kHz to 1.3 GHz. (Opt 003: 300 kHz to 3 GHz). Noise level: Reflection - 85 dBm (typical), Transmission -110 dBm (typical) @ 10 Hz bandwidth. Maximum input level: 0 dBm. Dynamic accuracy: ± 0.05 dB, ±0.3° over a 50 dB input range. Test Ports: 50 ohm Type N (female). Options. Opt 003, 3 GHz Frequency Extension. Opt 010, Time Domain Capability. Opt 802, Add Dual Disk Drive and Cable.


Standard Calibration $400.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 8752A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.

Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBm (sometimes dBmW) is an abbreviation for the power ratio in decibels (dB) of the measured power referenced to one milliwatt (mW). Zero dBm equals one milliwatt. A 3 dB increase represents roughly doubling the power, a 3 dB decrease, the power is reduced by about one half.

Noise Figure
Noise Figure the ratio of the signal-to-noise power ratio at the input to the signal-to-noise power ratio at the output.

Standing Wave Ratio (SWR)
Standing wave ratio (SWR) is the ratio of the amplitude of a partial standing wave at an antinode (maximum) to the amplitude at an adjacent node (minimum).

Please contact us for your Keysight (Agilent) 8752A REPAIR and/or Keysight (Agilent) 8752A RF Network Analyzer CALIBRATION

I'm interested in: 
Calibration Type (Select one):

Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:

What is the description of the problem?

How/when did the problem start?

 (*) Required Fields    For formal quote please fill in all fields.
From (Email):*
Contact Name:*
Address 1:
Address 2:
State/Territory/Province: *
Zip/Postal Code: