Keysight (Agilent) 8752B REPAIR and Keysight (Agilent) 8752B CALIBRATION

 
Custom-Cal has a high success rate in the repair of the Keysight (Agilent) 8752B. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 8752B Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Network Analyzer, SNA, VNA?
Shop for Comparable Products on our
 used Network Analyzer, SNA, VNA page or new Network Analyzer, SNA, VNA page

 
   Keysight (Agilent) 8752B   Description / Specification:    
Keysight (Agilent) 8752B 75 Ohm RF Network Analyzer

The HP 8752B RF network analyzer provides simple and complete vector network measurements in a compact and fully integrated RF network analyzer. Characterize your RF components and networks accurately and with the HP 8752B RF network analyzer in the 300 kHz to 1.3 or 3 GHz frequency range. Integration of the swept synthesized source, test set, and receiver results in a network analyzer that is easy to set up and use, which is ideal for service, incoming inspection, production, and final test measurements. The integrated synthesized source provides measurement port power level of +5 to -20 dBm with linear, log, list, power, and CW sweep types. The sensitive tuned receivers provide 100 dB of dynamic range. With two independent display channels available, you can simultaneously measure the reflection and transmission characteristics of the device under test on the crisp color display. Data can be displayed in log magnitude, linear magnitude, SWR, phase, group delay, polar, real, or Smith chart formats. The easy-to-use softkey measurement functions allow you to quickly measure the desired characteristic of your device under test. Specifications. Source Frequency Range: 300 kHz to 1.3 GHz, (Opt 003: 300 kHz to 3 GHz). Resolution: 1 Hz. Accuracy: ± 10 ppm. Output Power range: - 20 to + 5 dBm. Resolution: 0.1 dB. Flatness: < 2 dB peak-to-peak. Level accuracy (50 MHz, - 5 dBm): ± 0.5 dB. Impedance: 75 ohm. Receiver Frequency range: 300 kHz to 1.3 GHz. (Opt 003: 300 kHz to 3 GHz). Noise level: Reflection - 85 dBm (typical), Transmission -110 dBm (typical) @ 10 Hz bandwidth. Maximum input level: 0 dBm. Dynamic accuracy: ± 0.05 dB, ±0.3° over a 50 dB input range. Test Ports: 75 ohm Type N (female). Options. Opt 003, 3 GHz Frequency Extension. Opt 010, Time Domain Capability. Opt 802, Add Dual Disk Drive and Cable.



 

Standard Calibration $675.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 8752B. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Channel Bandwidth
Channel Bandwidth is the bandwidth over which power is measured. This is usually the bandwidth in which almost all of the power of a signal is contained.

Mismatch Uncertainty
Mismatch Uncertainty is caused by re-reflections between one device (the source) and the device that follows it (the load).

Rise Time
Rise time refers to the time required for a signal to change from a specified low value to a specified high value, usually 10 and 90 percent of pulse-top amplitude (vertical display is linear power).


Please contact us for your Keysight (Agilent) 8752B REPAIR and/or Keysight (Agilent) 8752B 75 Ohm RF Network Analyzer CALIBRATION

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: