Keysight (Agilent) E1411B CALIBRATION and Keysight (Agilent) E1411B REPAIR

A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) E1411B Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Multimeter DMM?
Shop for Comparable Products on our
 used Multimeter DMM page

   Keysight (Agilent) E1411B   Description / Specification:    
Keysight (Agilent) E1411B 5.5 Digit Multimeter, VXI

The HP / Agilent E1411B 5.5 Digit VXI Multimeter, C-Sized, 1-slot, register-based. The Agilent E1411B is identical in electrical design to the E1326B, differing only in size. Integrating A/D to make 5.5 digit, low-noise measurements, or switch to the sampling A/D to make 14-bit readings at rates up to 13 kHz. DCV, ACV, 2 and 4 wire Ohm, temperature, 5.5 digit low-noise integrating A/D, 13kHz high-speed sampling A/D, Balanced differential isolated inputs, DC Voltage rages 125 mV to 300 V, 4-wire Resistance ranges 256 Ohm to 1 MOhm, True RMS AC Voltage (20 Hz to 10 kHz) Ranges 87.5 mV to 300 V


Standard Calibration $105.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) E1411B. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.

Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Channel Bandwidth
Channel Bandwidth is the bandwidth over which power is measured. This is usually the bandwidth in which almost all of the power of a signal is contained.

Jitter in technical terms is the deviation in or displacement of some aspect of the pulses in a high-frequency digital signal. Jitter is the time variation of a periodic signal in electronics and telecommunications, often in relation to a reference clock source. Jitter may be observed in characteristics such as the frequency of successive pulses, the signal amplitude, or phase of periodic signals. Jitter is a significant, and usually undesired, factor in the design of almost all communications links (e.g., USB, PCI-e, SATA, OC-48). In clock recovery applications it is called timing jitter.

Overshoot is the distortion that follows a major transition; the difference between the peak power point and the pulse-top amplitude computed as a percentage of the pulse-top amplitude.

Rise Time
Rise time refers to the time required for a signal to change from a specified low value to a specified high value, usually 10 and 90 percent of pulse-top amplitude (vertical display is linear power).

Please contact us for your Keysight (Agilent) E1411B CALIBRATION and/or Keysight (Agilent) E1411B 5.5 Digit Multimeter, VXI REPAIR

I'm interested in: 
Calibration Type (Select one):

Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:

What is the description of the problem?

How/when did the problem start?

 (*) Required Fields    For formal quote please fill in all fields.
From (Email):*
Contact Name:*
Address 1:
Address 2:
State/Territory/Province: *
Zip/Postal Code: