ANDO AQ4321A REPAIR and ANDO AQ4321A CALIBRATION

The ANDO AQ4321A is currently in stock and available for purchase on our  Sales Page
It is also available for immediate rental.
Custom-Cal has a high success rate in the repair of the ANDO AQ4321A. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ANDO AQ4321A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Tunable Laser Source (TLS)?
Shop for Comparable Products on our
 used Tunable Laser Source (TLS) page or new Tunable Laser Source (TLS) page

 
   ANDO AQ4321A (AQ-4321A)   Description / Specification:    
ANDO AQ4321A 1480 to 1580 nm Tunable Laser Source

The Ando AQ4321A Tunable Laser Source Specifications. Wavelength range: 1480 to 1580 nm. Wavelength set resolution: 0.001nm. Wavelength stability: ±100 MHz/h (±0.8 pm/h) (typ.). Absolute wavelength accuracy: ±0.1nm, ±0.015 nm, ±0.01 nm (typ.). Relative wavelength accuracy: ±0.01 nm (typ.). Spectral width (Narrow): 200 kHz (typ.) (1 MHz or less). Spectral width (Wide): 200 MHz (typ.) (100 MHz or more). Side-Mode Suppression Ratio: 50 dB or more (optical output: +7 dBm, 1550 nm). Optical output (+7 dBm or more, 1520 to 1570 nm; +10 dBm (typ.) peak. Settable optical output range: 20 dB or more (0.1 dB steps, at peak wavelength). Optical output stability: 5 min, ±0.01dB or less; 1 hr, ±0.05dB or less; 8 hr, ±0.3dB or less. Optical output accuracy: ±1dB or less. Optical output reproducibility: ±0.04 dB, optical output fixed. Optical output level flatness: ±0.1 dB (1500 to 1580 nm). RIN: -145dB/Hz (typ.). Internal modulation (CHOP): Set frequency 0.2 to 300kHz; Set resolution 10Hz, 100Hz, 1kHz, 10kHz, 100kHz. External modulation (CHOP): Set frequency 0.2 to 300kHz. Direct modulation: Modulation rate 5% or less (Modulation frequency: 100 kHz to 300 MHz, modulation input level: 0 dBm or less). Wavelength sweep speed: 100nm/sec (Max.). Applicable optical fiber: SMF (10/125µm).



 

Standard Calibration $400.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ANDO AQ4321A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Coherence Length
Average distance over which superimposed waves lose their phase relationships

Linewidth
Linewidth is the width of a spectral line in terms of wavelength, wave number and frequency.

Power Flatness Versus Wavelength
When changing the wavelength at constant power setting and recording the differences between actual and displayed power levels, the power flatness is ± half the span (in dB) between the maximum and the minimum of the measured power levels.

Spectral Width
Spectral Width is the wavelength interval over which the magnitude of all spectral components is equal to or greater than a specified fraction of the magnitude of the component having the maximum value. In optical communications applications, the usual method of specifying spectral width is the full width at half maximum. This is the same convention used in bandwidth, defined as the frequency range where power drops by less than half (at most -3 dB).

Telecom Bands
Optical fiber communications typically operate in a wavelength region corresponding to one of the following Bands. O Band (original): 1260–1360 nm. E Band (extended): 1360–1460 nm. S Band (short wavelengths): 1460–1530 nm. C Band (conventional): 1530–1565 nm. L Band (long wavelengths): 1565–1625 nm. U Band (ultralong wavelengths): 1625–1675 nm


Please contact us for your ANDO AQ4321A REPAIR and/or ANDO AQ4321A 1480 to 1580 nm Tunable Laser Source CALIBRATION

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: