ANDO AQ4321D REPAIR and CALIBRATION

The ANDO AQ4321D is currently in stock and available for purchase on our  Sales Page
It is also available for immediate rental.
Custom-Cal has a high success rate in the repair of the ANDO AQ4321D. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Tunable Laser Source (TLS)?
Shop for Comparable Products on our
 used Tunable Laser Source (TLS) page or new Tunable Laser Source (TLS) page

 
   ANDO AQ4321D (AQ-4321D)   Description / Specification:    
ANDO AQ4321D 1520 to 1620 nm Tunable Laser Source

The Ando AQ4321D Tunable Laser Source Specifications. Wavelength range: 1520 to 1620 nm. Wavelength set resolution: 0.001nm. Wavelength stability: ±100 MHz/h (±0.8 pm/h) (typ.). Absolute wavelength accuracy: ±0.1nm, ±0.015 nm, ±0.01 nm (typ.). Relative wavelength accuracy: ±0.01 nm (typ.). Spectral width (Narrow): 200 kHz (typ.) (1 MHz or less). Spectral width (Wide): 200 MHz (typ.) (100 MHz or more). Side-Mode Suppression Ratio: 50 dB or more (optical output: +6 dBm, 1590 nm). Optical output +6 dBm or more, 1560 to 1600 nm; +7 dBm (typ.) peak. Settable optical output range: 20 dB or more (0.1 dB steps, at peak wavelength). Optical output stability: 5 min, ±0.01dB or less; 1 hr, ±0.05dB or less; 8 hr, ±0.3dB or less. Optical output accuracy: ±1dB or less. Optical output reproducibility: ±0.04 dB, optical output fixed. Optical output level flatness: ±0.1 dB ((1540 to 1600 nm)). RIN: -145dB/Hz (typ.). Internal modulation (CHOP): Set frequency 0.2 to 300kHz; Set resolution 10Hz, 100Hz, 1kHz, 10kHz, 100kHz. External modulation (CHOP): Set frequency 0.2 to 300kHz. Direct modulation: Modulation rate 5% or less (Modulation frequency: 100 kHz to 300 MHz, modulation input level: 0 dBm or less). Wavelength sweep speed: 100nm/sec (Max.). Applicable optical fiber: SMF (10/125µm).



 

Standard Calibration $400.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ANDO AQ4321D. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Chirp
A change in the optical frequency caused by direct modulation of the laser. A chirp is a signal in which the frequency increases ('up-chirp') or decreases ('down-chirp') with time. In some sources, the term chirp is used interchangeably with sweep signal.

Isolation
The extent to which optical power from one signal path is prevented from reaching another signal path.

Polarization Extinction Ratio
Polarization Extinction Ratio is the ratio of optical power in the slow axis of the polarization maintaining fiber to optical power in the fast axis within a specified wavelength range.

Sidemode Suppression Ratio
Sidemode Suppression Ratio is the ratio of average signal power to the optical power of the highest sidemode within a distance from 0.1 to 6 GHz to the signal’s optical frequency, expressed in dB.

Wavelength Stability
Wavelength Stability is the change of wavelength during given time span, expressed as ± half the span between the maximum and the minimum of all actual wavelengths.


I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: